BRCB016GWL-3 Datasheet, PDF (1/30 Pages) Rohm – WLCSP EEPROM

Datasheet
Serial EEPROM Series Standard EEPROM
WLCSP EEPROM
BRCB016GWL-3
General Description
BRCB016GWL-3 is a serial EEPROM of I²C BUS Interface Method
Features
„ Completely conforming to the world standard I²C BUS.
All controls available by 2 ports of serial clock (SCL)
and serial data (SDA)
„ 1.7V to 3.6V single power source operation most
suitable for battery use
„ 1.7V to 3.6V wide limit of operating voltage, possible
FAST MODE 400KHz operation
„ 16byte Page Write Mode useful for initial value write
at factory shipment
„ Self-timed Programming Cycle
„ Low Current Consumption
„ Prevention of Write Mistake at Low Voltage
„ More than 1 million write cycles
„ More than 40 years of data retention
„ Noise Filter built in SCL / SDA terminal
„ Initial delivery state FFh
Package W(Typ) x D(Typ) x H(Max)
UCSP50L1 1.10mm x 1.15mm x 0.55mm
BRCB016GWL-3
Capacity Bit Format
Type
Power Source Voltage Package
16Kbit
2K×8
BRCB016GWL-3
1.7V to 3.6V
UCSP50L1
○Product structure：Silicon monolithic integrated circuit
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product has no designed protection against radioactive rays
1/26
TSZ02201-0R2R0G100260-1-2
25.Feb.2013 Rev.002