|
BRCB008GWZ-3_13 Datasheet, PDF (1/29 Pages) Rohm – WLCSP EEPROM | |||
|
Datasheet
Serial EEPROM Series Standard EEPROM
WLCSP EEPROM
BRCB008GWZ-3
General Description
BRCB008GWZ-3 is a serial EEPROM of I2C BUS Interface Method
Features
 Completely conforming to the world standard I2C BUS.
All controls available by 2 ports of serial clock (SCL)
and serial data (SDA)
 1.7V to 3.6V Single Power Source Operation most
suitable for battery use
 1.7V to 3.6V wide limit of operating voltage, possible
FAST MODE 400KHz operation
 16byte Page Write Mode useful for initial value write
at factory shipment
 Self-timed Programming Cycle
 Low Current Consumption
 Prevention of Write Mistake at Low Voltage
 More than 1 million write cycles
 More than 40 years data retention
 Noise Filter Built in SCL / SDA terminal
 Initial delivery state FFh
Package W (Typ) x D(Typ) x H(Max)
UCSP30L1 0.94mm x 0.94mm x 0.33mm
BRCB008GUZ-3
Capacity Bit Format
Type
Power Source Voltage Package
8Kbit
1KÃ8
BRCB008GWZ-3
1.7V to 3.6V
UCSP30L1
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product has no designed protection against radioactive rays
TSZ02201-0R2R0G100250-1-2
1/25
25.Feb.2013 Rev.002
|
▷ |