|
BR24G02-3_1 Datasheet, PDF (1/38 Pages) Rohm – I2C BUS EEPROM (2-Wire) | |||
|
Datasheet
Serial EEPROM Series Standard EEPROM
I2C BUS EEPROM (2-Wire)
BR24G02-3
General Description
BR24G02-3 is a 2Kbit serial EEPROM of I2C BUS Interface.
Features
Packages W(Typ) x D(Typ) x H(Max)
 Completely Conforming to the World Standard I2C
BUS. All Controls Available by 2 Ports of Serial
Clock (SCL) and Serial Data (SDA)
 Other Devices than EEPROM can be Connected to
the Same Port, Saving Microcontroller Port
 1.6V to 5.5V Single Power Source Operation Most
Suitable for Battery Use
 1.6V to 5.5V Wide Limit of Operating Voltage,
Possible FAST MODE 400KHz Operation
 Up to 8 Byte in Page Write Mode
 Bit Format 256 x 8
 Self-timed Programming Cycle
 Low Current Consumption
 Prevention of Write Mistake
¾ Write (Write Protect) Function Added
¾ Prevention of Write Mistake at Low Voltage
 More than 1 Million Write Cycles
 More than 40 Years Data Retention
 Noise Filter Built in SCL / SDA Terminal
 Initial Delivery State FFh
DIP-T8
9.30mm x 6.50mm x 7.10mm
TSSOP-B8
3.00mm x 6.40mm x 1.20mm
SOP8
5.00mm x 6.20mm x 1.71mm
TSSOP-B8J
3.00mm x 4.90mm x 1.10mm
SOP- J8
4.90mm x 6.00mm x 1.65mm
MSOP8
2.90mm x 4.00mm x 0.90mm
SSOP-B8
3.00mm x 6.40mm x 1.35mm
VSON008X2030
2.00mm x 3.00mm x 0.60mm
Figure 1.
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product has no designed protection against radioactive rays
1/34
TSZ02201-0R2R0G100170-1-2
08.Aug.2013 Rev.006
|
▷ |