BP5048-15 Datasheet, PDF (1/3 Pages) Rohm – AC/DC converter - AC220V input, 15V/200mA output

AC/DC converter
AC220V input, 15V/200mA output
BP5048-15
Absolute Maximum Ratings
Parameter
Input voltage
Output current
ESD endurance
Operating temperature range
Storage temperature range
Symbol
Vi
Io
Vsurge
Topr
Tstg
Limits
358
200
2
−20 ~ +80
−25 ~ +105
Unit
V
mApk
kV
°C
°C
Dimension(Unit : mm)
35.0MAX.
9.2MAX.
3.6MAX.
1 35 7
10
5.08 ^0.5±0.1 1.3±0.2
2.54×11=27.94
12
0.25±0.05
4.85MAX.
4.35MAX.
Electrical Characteristics
Parameter
Symbol Min. Typ. Max. Unit
Conditions
Input voltage range
Vi 249 311 358 V DC (177~254VAC)
Output voltage
Vo 14.5 15.2 16.5 V Vi=311V, Io=100mA
Output current
Io
−
−
200 mA Vi=311V
∗1
Line regulation
Vr −0.20 0.05 0.20 V Vi=249~358V, Io=100mA
Load regulation
Vl −0.20 0.05 0.20 V Vi=311V, Io=0~100mA
Output ripple voltage Vp
−
0.07 0.15 Vp-p Vi=311V, Io=100mA ∗2
Power conversion effciency η
60
75
−
% Vi=311V, Io=200mA
∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve.
∗2 Spike noise is not included in output ripple voltage.
Application circuit
BP5048-15
Please note that pin No.12
side is input.
Input
AC220V
50Hz/60Hz
D1
ZNR +
−
12
R1
FUSE
1A
10Ω1/4W
C2
C1
4.7µF/450V 0.1µF
Pin No.
Function
1 Output terminal Vo(15V)
2 Not used
3 Coil connect
4 Not used
5 Coil connect
6 Not used
7 COMMON
8 Not used
9 Not used
7 531
10 N.C.
11 Not used
L1
1mH
Output
12
+15V
+ ^C3
Input terminal Vi(311VDC)
− 100µF/50V
Be sure to use fuse for safety.
For acutual usage, Please kindly evaluate and confirm our part mounted in your product,
Especially, Please make sure to confirm whether the load current exceed Max. rated current
by using the current probe.
External components setting
FUSE: Fuse
C1: Capacitor for input
voltage smoothing
C2: For noise terminal
voltage reduction
C3: Capacitor for Output
voltage smooting
D1: Rectifier diode
L1: Coil
R1: For noise terminal
voltage reduction
ZNR: Varistor
Please make sure to use quick acting fuse 1A
Capacitance : 3.3~22µF Rated voltage : 450V or higher
Ripple current is 0.13Arms above.
Capacitance : 0.1µF~0.22µF Rated voltage : 450V or higher
Film capacitor or ceramic capacitor. Reduce the noise terminal voltage.
The constant value should be evaluated in the set.
Capacitance : 100µF~470µF Rated voltage : 25V or higher,
ESR is 0.39Ω max. Ripple current is 0.1Arms above.
Output noise voltage is infulenced.Please evaluate it in the actual set.
In the absolute maximum ratings, the reverse peak voltage should be
800V or higher, the average rectifying current should be 0.5A or higher,
and the peak surge current should be 20A or higher.
(Full-wave rectifier can be used in out part.)
Coil for switching regulator. The inductance should be 1mH,
the rated direct current should be 0.4A above.
Otherwise heating or abnormal oscilation occurs.
10Ω~22Ω 1/4W
Reduce the noise terminal voltage.The constant value should be evaluated
in set.
Varistor must be used. It protects this part from lightning surge and static
electricity.
Deratinh Curve
Derating Curve
300
250
200
150
Operation Range
100
50
0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90
Ambient Temperature Ta(°C)
Conversion Efficiency
Conversion Efficiency
100
(Ta=25°C, Vi=311V)
90
80
70
60
50
40
30
20
10
0
0
50
100 150 200
Output Current Io(mA)
Load Regulation
16.1
15.9
15.7
15.5
15.3
15.1
14.9
14.7
14.5
14.3
0
Load Regulation
(Ta=25°C, Vi=311V)
50
100
150
200
Output Current Io(mA)
Surface Temperature Rising
Surface Temperature Rising
(Ta=25°C, Vi=311V)
40
35
30
25
20
15
10
5
0
0
50
100 150 200
Output Current Io(mA)
1/2