BP5041A_10 Datasheet, PDF (1/4 Pages) Rohm – Non-Isolated AC/DC Converter

Data Sheet
220VAC Input/12VDC (100mA) Output
Non-Isolated AC/DC Converter
BP5041A
Absolute Maximum Ratings
Parameter
Input voltage
Output current
ESD enduration
Operating temperature range
Storage temperature range
Symbol
Vi
Io
Vsurge
Topr
Tstg
Limits
390
100
2
−25 to +80
−25 to +105
Unit
V
mApk
kV
°C
°C
Electrical Characteristics
Parameter
Symbol Min. Typ. Max. Unit
Conditions
Input voltage range
Vi 226 282 390 V DC(160 to 276VAC)
Output voltage
Vo 11.0 12.0 13.0 V Vi=282V, Io=50mA
Output current
Line regulation
Io
0
−
100 mA Vi=282V
∗1
Vr
− 0.02 0.15 V Vi=226 to 390V, Io=50mA
Load regulation
Vl
Output ripple voltage Vp
− 0.05 0.15 V Vi=282V, Io=0 to 50mA ∗2
− 0.05 0.15 Vp-p Vi=282V, Io=50mA
Power conversion effciency η
50 62
−
% Vi=282V, Io=100mA _∗2
∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve.
∗2 Please refer to Load regulation, Conversion effciency.
Application Circuit
Pin No.
Function
BP5041A
Please note that pin No.10
side is input.
1 Output terminal Vo(12V)
2 Not used
3 N.C.
4 Not used
5 COMMON
6 Not used
7 N.C.
10
7531
8 Not used
9 Not used
FUSE
R1
0.5A
Output ^{10 Input terminal Vi(282VDC)}
D1
10Ω1/4W
+12V
Input
AC200V
50Hz/60Hz
ZNR + _C1
− _{4.7µF/450V}
C2
0.1µF
+ ^C3
− 100µF/50V
Be sure to use fuse for safety.
Please verify operation and characteristics in the customer's circuit before actual usage.
Ensure that the load current does not exceed the maximum rating.
External Component Specifications
FUSE: Fuse
Use a quick-acting fuse of 0.5A
C1: Input smoothing
capacitor
Capacitance : 3.3 to 22µF Rated voltage : 450V or higher
Ripple current is 0.13Arms or greater.
C2: Noise reduction
resistor
Capacitance : 0.1 to 0.22µF Rated voltage : 400V or higher
Use a film or ceramic capacitor. Evaluate under actual operating
conditions.
C3: Output smoothing
capacitor
D1: Rectifier diode
Capacitance : 100 to 470µF Rated voltage : 25V or higher,
ESR is 0.39Ω max. Ripple current is 0.1Arms or higher.
Evaluate under actual operating conditions.
In the absolute maximum ratings, the reverse peak voltage should be
800V or higher, the average rectifying current should be 0.5A or higher,
and the peak surge current should be 20A or higher.
(Full-wave rectification can be used.)
R1: Noise reduction
resistor
ZNR: Varistor
10 to 22Ω 1/4W
Determine the ideal value through actual testing.
A varistor is required to protect against lightning surges and static
electricity.
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
1/1
Dimensions (Unit : mm)
32.5MAX.
11.5MAX.
3.25MAX.
1
3
5
P = 5 . 0 8 ±0 . 2
22.86
7
10
0 . 5 ±0 . 1
1 . 3 ±0 . 2
0 . 2 5 ±0 . 0 5
4.75MAX.
6.75MAX.
Derating Curve
Derating Curve
120
100
80
60
Operation Range
40
20
0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90
Ambient Temperature Ta(°C)
Switching Frequency
Switching Frequency
(Ta=25°C, Vi=282V)
45
40
35
30
25
20
15
10
5
0
0 20 40 60 80 100
Output Current Io(mA)
Conversion Efficiency
Conversion Efficiency
100
(Ta=25°C, Vi=282V)
80
60
40
20
0
0 20 40 60 80 100
Output Current Io(mA)
Load Regulation
13.0
12.8
12.6
12.4
12.2
12.0
11.8
11.6
11.4
11.2
11.0
0
Load Regulation
(Ta=25°C, Vi=282V)
20 40 60 80 100
Output Current Io(mA)
Surface Temperature Increase
Surface Temperature Increase
(Ta=25°C,Vi=282V)
50
40
30
20
10
0
0 20 40 60 80 100
Output Current Io(mA)
2010.01 - Rev.A