BP5038A1_10 Datasheet, PDF (1/4 Pages) Rohm – Non-Isolated AC/DC Converter

Data Sheet
100VAC Input/5VDC (30mA) Output
Non-Isolated AC/DC Converter
BP5038A1
Absolute Maximum Ratings
Parameter
Input voltage
Output current
ESD endurance
Operating temperature range
Storage temperature range
Symbol
Vi
Io
Vsurge
Topr
Tstg
Limits
170
30
2
−20 to +80
−20 to +85
Unit
V
mApk
kV
°C
°C
Electrical Characteristics
Parameter
Symbol Min. Typ. Max. Unit
Conditions
Input voltage range
Vi 113 141 170 V DC(80 to 120VAC)
Output voltage
Vo
4.7 5.0 5.3
V Vi=141V, Io=15mA
Output current
Line regulation
Io
0
−
30 mA Vi=141V
∗1
Vr
−
0.1 0.3
V Vi=113 to 170V, Io=15mA
Load regulation
Vl
Output ripple voltage Vp
− 0.15 0.3
V Vi=141V, Io=0 to 15mA _∗2
− 0.05 0.15 Vp-p Vi=141V, Io=15mA
Power conversion efficiency η
25 33
−
% Vi=141V, Io=30mA
∗2
∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve.
∗2 Please refer to Load regulation, Conversion efficiency.
Application Circuit
BP5038A1
Pin No.
Function
1 Input terminal Vi(141VDC)
2 Skip
3 Skip
4 COMMON
5 COMMON
6 Output terminal Vo(5V)
1
456
FUSE
D1
R1
0.5A
1SR35−400A 10Ω1/4W
Output
+5V
Input
AC100V
50Hz/60Hz
ZNR + _C1
C2
220V − _10µF/200V 0.1µF
+ ^C3
− 100µF/50V
Be sure to use fuse for safety.
Please verify operation and characteristics in the customer's circuit before actual usage.
Ensure that the load current does not exceed the maximum rating.
External Component Specifications
FUSE: Fuse
Use a quick-acting fuse (0.5A)
C1: Input capacitor
Above 200V, 3.3 to 22µF
Ripple current 0.13Arms or above.
C2: Noise removal capacitor
Above 200V, 0.1 to 0.22µF
Film or ceramic capacitor
Reduce the noise terminal voltage.
The value should be verified under actual conditions.
C3: Output capacitor
Above 25V, 100 to 470µF, low impedance
ESR : 0.39Ω Max.
Ripple current 0.1Arms or above
Capacitor impedance affects the output ripple voltage.
R1: Noise removal resistor Resistance : 10 to 22Ω, Power : More than 1/4Ω
D1: Rectifier diode
Use a rectifying diode with a peak reverse voltage of 400V or higher,
an average rectification current of 0.5A or larger and a large capacity input
capacitor, peak surge current of 20A or larger. When using a large capacity
input capacitor, choose a component that is strong against inrush current
during startup.
This product is compatible with full-wave rectification.
ZNR: Varistor
A varistor must be used to protect against lightning surges and static
electricity.
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
1/1
Dimensions (Unit : mm)
18.0MAX.
9.1MAX.
3.3MAX
1
456
1 . 3 ±0 . 2
0 . 5 ±0 . 1
2.54�5=12.7
P = 2 . 5 4 ±0 . 2
0 . 2 5 ±0 . 0 5
3.0MAX.
6.1MAX.
Derating Curve
Derating Curve
40
35
30
25
20
15
Operation Range
10
5
0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90
Ambient Temperature Ta(°C)
Switching Frequency
Switching Frequency
(Ta=25°C, Vi=141V)
60
50
40
30
20
10
0
0 5 10 15 20 25 30
Output Current Io(mA)
Conversion Efficiency
Conversion Efficiency
(Ta=25°C, Vi=141V)
40
35
30
25
20
25% Min−Line
15
10
5
0
0 5 10 15 20 25 30
Output Current Io(mA)
Load Regulation
5.3
5.2
5.1
5.0
4.9
4.8
4.7
0
Load Regulation
(Ta=25°C, Vi=141V)
5 10 15 20 25 30
Output Current Io(mA)
Surface Temperature Increase
Surface Temperature Increase
(Ta=25°C, Vi=141V)
50
40
30
20
10
0
0 5 10 15 20 25 30
Output Current Io(mA)
2010.01 - Rev.A