BP5034D24_10 Datasheet, PDF (1/4 Pages) Rohm – Non-Isolated AC/DC Converter

Data Sheet
100VAC Input/24VDC (50mA) Output
Non-Isolated AC/DC Converter
BP5034D24
Absolute Maximum Ratings
Parameter
Input voltage
Output current
ESD endurance
Operating temperature range
Storage temperature range
Symbol
Vi
Io
Vsurge
Topr
Tstg
Limits
195
50
2
−20 to +80
−25 to +85
Unit
V
mApk
kV
°C
°C
Electrical Characteristics
Parameter
Symbol Min. Typ. Max. Unit
Conditions
Input voltage range
Vi 113 141 195 V DC(80 to 138VAC)
Output voltage
Vo 22.0 24.0 26.0 V Vi=141V, Io=25mA
Output current
Line regulation
Io
0
−
50 mA Vi=141V
∗1
Vr
−
0.02 0.1
V Vi=113 to 195V, Io=50mA
Load regulation
Vl
Output ripple voltage Vp
− 0.05 0.15 V Vi=141V, Io=0 to 25mA ∗2
− 0.05 0.15 Vp-p Vi=141V, Io=25mA
Power conversion efficiency η
65 72
−
% Vi=141V, Io=50mA _∗2
∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve.
∗2 Please refer to Load regulation, Conversion efficiency.
Application Circuit
BP5034D24
Please note that pin No.10
side is input.
10 8 7 6 5 4 3 2 1
D1
R1
FUSE
0.5A
1SR35−400A ^10Ω1/4W
Output
+24V
Input
AC100V
50Hz/60Hz
ZNR + _C1
C2
220V ^− 10µF/250V 0.1µF
+ C3
− 100µF/50V
Pin No.
Function
1 Output terminal Vo(24V)
2 N.C.
3 N.C.
4 N.C.
5 COMMON
6 COMMON
7 N.C.
8 N.C.
9 Not used
10 Input terminal Vi(141VDC)
Be sure to use fuse for safety.
Please verify operation and characteristics in the customer's circuit before actual usage.
Ensure that the load current does not exceed the maximum rating.
External Component Specifications
FUSE: fuse
Use a quick-acting fuse of 0.5A
C1: Input smoothing
capacitor
Capacitance : 3.3µF to 22µF
Rated voltage : 250V or higher
C2: Noise reduction
capacitor
C3: Output smoothing
capacitors
Capacitance : 0.1µF to 0.22µF
Rated voltage : 250V or higher
Use a film or ceramic capacitor. Evaluate under actual operating
conditions.
Capacitance : 100µF to 470µF
Rated voltage : 35V or higher, low impedance
Impedance is 0.39Ω max. at high frequencies.
Ripple current 0.1 Arms or greater.
Capacitor impedance affects the output ripple voltage.
D1: Rectifier diode
R1: Noise reduction
resistor
ZNR: Varistor
In the absolute maximum ratings, the reverse surge voltage should be
400V or higher, the average rectifying current should be 0.5A or higher,
and the forward surge current should be 20A or higher.
10Ω to 22Ω 1/4W
Determine the ideal value through actual testing.
A varistor is required to protect against lightning surges and static
electricity.
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
1/1
Dimensions (Unit : mm)
28.2MAX.
10.0MAX.
3.25MAX.
1 2 3 4 5 67 8
0 . 5 ±0 . 1 _{1 . 3 ±0 . 2}
P = 2 . 5 4 ±0 . 2
2.54�9=22.86
10
0.25± 0.05
3.5MAX.
6.5MAX.
Derating Curve
Derating Curve
60
50
40
30
Operation Range
20
10
0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90
Ambient Temperature Ta(°C)
Switching Frequency
Switching Frequency
(Ta=25°C, Vi=141V)
140
120
100
80
60
40
20
0
0 10 20 30 40 50
Output Current Io(mA)
Conversion Efficiency
Conversion Efficiency
(Ta=25°C, Vi=141V)
80
70
60
50
40
30
20
10
0
0 10 20 30 40 50
Output Current Io(mA)
Load Regulation
Load Regulation
(Ta=25°C, Vi=141V)
26.0
25.6
25.2
24.8
24.4
24.0
23.6
23.2
22.8
22.4
22.0
0 10 20 30 40 50
Output Current Io(mA)
Surface Temperature Increase
Surface Temperature Increase
(Ta=25°C, Vi=141V)
40
35
30
25
20
15
10
5
0
0 10 20 30 40 50
Output Current Io(mA)
2010.01 - Rev.A