BP3599 Datasheet, PDF (1/1 Pages) Rohm – Wireless LAN Module with Flash Memory

New Product Bulletin
Wireless LAN Module with Flash Memory
BP3599
Enable wireless LAN communication by
simply connecting to existing sets
Product Outline
The BP3599 takes the IEEE802.11b/g/n BP3591 wireless LAN module with built-in antenna and flash
memory. In
addition, the antenna design is identical to the BP3591, eliminating the need for high-frequency circuitry, and
the BP3599 is pin-compatible with the BP3591, making replacement easy. The internal flash memory comes
pre-loaded with firmware including TCP/IP stack, and the module is already certified* for use in Japan and the US,
enabling implementation possible.
*Please inquire regarding applicable radio laws in other countries
■ _{All-in-one wireless LAN module}
Built-in antenna eliminates
the need for high-frequency
designs
MAC address information
contained in the macro
QR code
Complies with applicable
radio laws in Japan and
the US
MAC address
included before
shipment
Connect an external antenna
via coaxial connector
Integrated flash memory
includes firmware
M2 screw holes
for mounting
Front
24mm
Rear
0.5mm-pitch 34pin
low profile connector
Firmware, including the TCP/IP stack, is pre-loaded in the internal flash memory. Stations and
access points are written in Regions 1 and 2, respectively, making it easy to change operating
modes by switching the FLASH_SEL pin from High to Low and vice versa.
■ _{Firmware with TCP/IP stack}
3.3V
HOST
MCU
BP3599
Flash Memory
[Firmware Included]
BP3591
BP3580
OSC
LDO
LDO BB/MAC
RF
EEPROM
The firmware written in the flash memory includes protocols essential for wireless LAN
communication, such as WPA-PSK, WPA2-PSK, and WPS. In addition, the pre-loaded
TCP/IP stack enables both wireless LAN and network processing, making it easy to add IP
communication to sets that previously could not support wireless LAN due to insufficient
microcontroller processing capability or other restrictions.
■ _{Specifications}
Wireless LAN Standards
Host Interface
Integrated Flash Memory
Transmission Frequency
Transmission Power
Communication Rate
Access Method
Access Mode
Security
Supply Voltage
Current Consumption
Operating Environment
WPS (Wi-Fi Protected Setup)
Radio Act Certification
IEEE802.11b,IEEE802.11g
IEEE802.11n,IEEE802.11i
UART (~921600bps)
4Mbit serial flash memory
2,400MHz to 2,483.5MHz (ch1-ch13)
IEEE802.11b : 15dBm±2dB
IEEE802.11g : 13dBm±2dB
IEEE802.11n : 12dBm±2dB
IEEE802.11b : 1-11Mbps
IEEE802.11g : 6-54Mbps
IEEE802.11n : 6.5-72.2Mbps
CSMA/CA
Infrastructure/Ad hoc
64bit/128bit WEP, TKIP, AES
3.3V
Continuous transmission : 300mA typ.
Reception : 200mA Typ.
Sleep : 500μA
Temperature : -40 to +85°C
Humidity
: <85% (No condensation)
PIN/PBC methods
Japan and the US (Japan only when using external antenna)
Configuration Options
A dedicated 2.54mm-pitch conversion
board is available, while adding an
optional external antenna improves
communication distance and enables
mounting in sets with metallic housings
for broader applicability.ɹ
Dedicated Conversion Board
External Antenna
Applications
• Industrial equipment, sensor networks, home networks
• Wireless LAN routers and peripheral devices
• Smartphones and the like
• Systems that could not support wireless LAN due to insufficient MCU
• Systems that could not support wireless LAN due to costs
Support:http://micro.rohm.com/en/download_support/wireless_lan_system/
16th October,2012.
10.2012