|
BM520Q15F Datasheet, PDF (1/19 Pages) Rohm – Quasi-resonant Switching Mode | |||
|
Datasheet
AC/DC Drivers
AC/DC Controller IC for LED Lighting
Included 650V MOSFET
BM520Q15F
â General Description
The AC/DC quasi-resonant controller type LED
driver IC BM520Q15F can be applied to a non-isolated
application, making the designs for various types of
low power converter easy.
The low power consumption and high-speed start
are achieved through the start-up circuit with 650V
withstand voltage.
Due to the quasi-resonant mode, soft switching is
achieved. The EMI is also improved by the alterable
operating frequency. A power supply design with a high
degree of freedom can also be achieved by the
external current setting resistance.
A low-cost application can be achieved with the
built-in MOSFET with 650V withstand voltage. It also
makes the application design easy.
âFeatures
ï® Quasi-resonant Switching Mode
ï® Built-in 650V Starter Circuit
ï® Built-in 650V Switching MOSFET
ï® Maximum Frequency of 200kHz
ï® VCC pin: Under Voltage Protection
ï® VCC pin: Over Voltage Protection (latch)
ï® SOURCE pin: Leading-Edge-Blanking Function
ï® ZT pin: Trigger Mask Function
ï® ZT pin: Over Voltage Protection (latch)
ï® NTC pin: Temperature Detecting Protection
(Automatic Recovery)
âPackage
SOP8
5.00mm à 4.40mm pitch 1.27mm
(Typ) (Typ)
(Typ)
âKey Specifications
ï®Operating Power Supply Voltage Range:
VCC 8.9V to 26.0V DRAIN: ï½650V
ï® Operating Current: Normal Operation: 0.35mA (Typ)
ï® Operating Temperature Range: - 40°C. to +105°C
ï® MOSFET ON Resistance: 4.0⦠(Typ)
âApplication
LED bulb, sealed-type LED lighting
Electrical machineries for LED lighting
âTypical Application Circuit
A
ï½
BM520Q15F
Figure 1. Application circuit
âProduct structureï¼Silicon monolithic integrated circuit
.www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
TSZ22111ã»14ã»001
âThis product has no designed protection against radioactive rays.
1/16
TSZ02201-0F1F0C300030-1-2
03.Mar.2014 Rev.001
|
▷ |