BM2LB150FJ-C Datasheet, PDF (1/17 Pages) Rohm – 2ch Low Side Switch IC

Datasheet
Automotive IPD Series
2ch Low Side Switch IC
BM2LB150FJ-C
Features
■ Built-in overcurrent limiting circuit(OCP)
■ Built-in thermal shutdown circuit (TSD)
■ Direct control enabled from CMOS logic IC, etc.
■ Low On resistance R_DS(ON) up to 150 m
(when V_IN=5V, I_D=0.5A, T_j=25°C)
■ Monolithic power management IC with the control
block (CMOS) and power MOS FET mounted on a
single chip
■ Surface mount package SOP-J8
■ AEC-Q100 Qualified ^{(Note 1)}
(Note 1) Grade1
General Description
The BM2LB150FJ-C is an automotive 2ch low side
switch IC, which has built-in overcurrent limiting circuit,
thermal shutdown circuit, and overvoltage (active clamp)
protection circuit.
Applications
2ch low side switch for driving resistive, inductive load,
Capacitive load
Product Summary
On-state resistance (T_j =25°C, Typ)
Overcurrent limit (T_j =25°C, Typ)
Output clamp voltage (Min)
Active clamp energy (T_j =25°C)
150mΩ
10A
42V
165mJ
Package
SOP-J8
W(Typ) x D(Typ) x H(Max)
4.90mm x 6.00mm x 1.65mm
Block Diagram
Active Clamp
Circuit
Thermal
Shutdown
Circuit
Overcurrent
Limiting
Circuit
Active Clamp
Circuit
Thermal
Shutdown
Circuit
Overcurrent
Limiting
Circuit
Product structure: Silicon monolithic integrated circuit
www.rohm.com
© 2016 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
This product is not designed to protect it from radiation
1/13
TSZ02201-0G2G0BD00150-1-2
01.Aug.2016 Rev.003