|
BH7760KV Datasheet, PDF (1/7 Pages) Rohm – Analog signal I / O interface for portable audio applications | |||
|
Multimedia ICs
Analog signal I / O interface for
portable audio applications
BH7760KV
The BH7760KV contains the complete audio I / O analog block on a single-chip IC. Therefore, all necessary func-
tions for a DVC audio analog I / O interface are provided on one chip.
â¢Applications
Portable audio applications
â¢Features
1) Contains the input amplifier, wind noise deletion fil-
ter, ALC, 30kHz LPF, line amplifier, stereo head-
phone amplifier, and BTL monaural speaker amplifi-
er required to configure a analog signal I / O inter-
face (audio I / O) all on one chip.
2) With the internal 3-line serial control decoder circuit,
serial control enables the setting of the various
modes for the IC.
â¢Absolute maximum ratings (Ta = 25°C)
Parameter
Symbol
Limits
Unit
Applied voltage
VCC
+ 7.0
V
Power dissipation
Pd
900â
mW
Operating temperature
Topr
â 10 ~ + 70
°C
Storage temperature
Tstg
â 55 ~ + 125
°C
â Reduced by 9.0mW for each increase in Ta of 1°C over 25°C with the IC unmounted.
â When mounted on a 70mm à 70mm à 1.6mm glass epoxy board.
â¢Recommended operating conditions (Ta = 25°C)
Parameter
Symbol
Limits
Unit
Power supply voltage (analog system)
AVcc
+ 4.0 ~ + 6.0
V
Power supply voltage (for SP)
SPVcc
+ 4.0 ~ + 6.0
V
Power supply voltage (digital system)
DVcc
+ 2.7 ~ + 3.3
V
ẠNot designed for radiation resistance.
1
|
▷ |