|
BH6260MWX Datasheet, PDF (1/10 Pages) Rohm – USB Switch ICs SPST Type(Single Pole Single Throw) | |||
|
USB Switch ICs
SPST Type
(Single Pole Single Throw)
BH6260MWX
No.11103EAT04
âDescription
BH6260MWX is SPST x 2ch and Inverter x 2ch analog switches. Analog SW0 and SW1 pass USB 2.0 high-speed signal.
Analog SW2 and SW3 pass UART signal. Moreover, this is guaranteed from 2.9V to 3.7V as for the range of the
power-supply voltage. Enable signals ENB0, ENB1, EN2, and EN3 can control Analog SW0, SW1, SW2, and SW3.
Furthermore, this is able to pass USB 2.0 high-speed signal without distortion, because of Analog SW0 and SW1 are low
capacitance. The electrostatic discharge protection circuit is built-in in all terminals.
âFeatures
1) 5Ω switches connect inputs to outputs
2) Low Capacity Analog SW 2ch with clamp Diode
3) 1.8V Output Inverter 2ch
4) 16-Pin SON Package (3.3mm x 1.5mm, Height=0.6mm, 0.4mm pitch)
5) It contributes to the miniaturization because all external is built into.
âApplications
Digital Still Cameras, Digital Video Camcorders, Portable Navigation Devices, TV, Portable DVD Players,
Portable Game Systems, Personal computers, PDA, Mobile phones
âLine up matrix
Parameter
BH6260MWX
BD11600NUX
BD11603MWX
BD11601NUX
Supply Quiescent Current
0 μA
18 μA
18 μA
18 μA
Input voltage range
Switch ON Resistance
( VIN=0 V )
Switch ON Capacitance
Configuration
Package
2.9ï½3.7 V
2.5ï½5.5 V
5Ω
3Ω
10 pF
SPST x 2ch
and Inverter x 2ch
USON016X3315
6 pF
DPDT
VSON010X3020
2.5ï½5.5 V
3Ω
7 pF
MUX x 2Lines
USON016X3315
2.5ï½5.5 V
2.5 Ω
6 pF
DPST
VSON008X2020
âAbsolute maximum ratings (Ta=25â)
Parameter
Symbol
Input supply voltage1
Vmax1
Input supply voltage2
Vmax2
Ratings
-0.3ï½5.5
-0.3ï½VDD+0.3
Unit
Conditions
V
VDD,VDD18,B2,ENB0
ENB1,EN2,EN3
V A0,B0,A1,B1,A3
Input supply voltage3
Vmax3
-0.3ï½VDD18+0.3
V B3
Input supply voltage4
Vmax4
-0.3ï½VDD+0.3
V A2 *3
Input supply voltage5
Vmax5
-0.3ï½VDD18+0.3
V A2 *4
Power dissipation
Pd
850
mW *1
Operating temperature range
Topr
-40ï½+85
â
Storage temperature range
Tstr
-55ï½+125
â
*1 When using more than at Ta=25â, it is reduced 8.5 mW per 1â. ROHM specification board 70mmà 70mm mounting.
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/9
2011.08 - Rev.A
|
▷ |