BH3810FS Datasheet, PDF (1/9 Pages) Rohm – Vocal fader IC with input selector

Multimedia ICs
Vocal fader IC with input selector
BH3810FS
The BH3810FS is a vocal fader IC that is serial control compatible. It has mode switching that also includes a voice
multiplexing mode, a five-input selector, a gain selector and other such features, which can all be controlled serially.
Eight open-collector terminals and two tri-state terminals are provided on the chip to facilitate control by other ICs.
•^Applications
Component stereo systems, CD radio cassette players, TVs and car stereos.
•^Features
1) Built-in low-pass filter can perform vocal fader func-
tion (erasing of vocals from commercially available
music software) using just one chip.
2) Serial control can be used to switch between vocal
fader, through, multiplex, and mute modes.
3) Built-in gain selector allows selection of gain from
6dB to 20dB in 2dB steps.
4) Five-channel input selector.
5) Mic. mixing amplifier with mute function. Key con-
troller input also provided.
6) SSOP-A32 pin package.
•^{Absolute maximum ratings (Ta = 25°C)}
Parameter
Symbol
Limits
Unit
Applied voltages
Power dissipation
VDD
+ 5.5
V
VEE
– 4.5
Pd
850^∗
mW
Operating temperature
Topr
– 40 ~ + 85
°C
Storage temperature
Tstg
– 55 ~ + 125
°C
Maximum open collector voltage
VOP
14
V
∗ Reduced by 8.5mW for each increase in Ta of 1°C over 25°C ,
when mounted on a 50mm × 50mm × 1.6mm board.
•^{Recommended operating conditions (Ta = 25°C)}
Parameter
Symbol
Limits
Unit
VDD
4.0 ~ 5.3
V
Power supply voltage
VEE
– 4.3 ~ – 3.0
V
1