BD9896FV Datasheet, PDF (1/5 Pages) Rohm – Silicon Monolithic Integrated Circuit

1/4
STRUCTURE
NAME OF PRODUCT
Silicon Monolithic Integrated Circuit
DC-AC Inverter Control IC
TYPE
FUNCTION
ＢＤ９８９６ＦＶ
・2ch control with Push-Pull
・Lamp current and voltage sense feed back control
・Sequencing easily achieved with Soft Start Control
・Circuit protection with Timer Latch
・Under Voltage Lock Out
・Over Voltage Protection
・Mode-selectable the operating or stand-by mode by stand-by pin
・BURST mode controlled by PWM and DC input
・Output linear Controllable Analog dimming by external DC voltage
・Synchronous operating the other several BD9896FV IC’s
○Absolute Maximum Ratings（Ta = 25℃）
Parameter
Supply Voltage
Operating Temperature Range
Storage Temperature Range
Power Dissipation
Maximum Junction Temperature
Symbol
VCC
Topr
Tstg
Pd
Tjmax
Limits
15
-40～+90
-55～+150
1062^*
+150
Unit
V
℃
℃
mW
℃
*_{Pd derated at 8.5mW/℃ for temperature above Ta = 25℃ (When mounted on a PCB 70.0mm×70.0mm×1.6mm)}
〇Recommended operating condition
Parameter
Supply voltage
Output oscillation frequency
BCT oscillation frequency
Symbol
VCC
fout
fBCT
Limits
6.0～14.0
25～90
0.05～1.00
Unit
V
kHz
kHz
Status of this document
The Japanese version of this document is the official specification.
Please use the translation version of this document as a reference to expedite understanding of the official version.
If these are any uncertainty in translation version of this document, official version takes priority.
REV. C