|
BD9394FP Datasheet, PDF (1/31 Pages) Rohm – White LED Driver for large LCD Panels (DCDC Converter type) | |||
|
Datasheet
LED Drivers for LCD Backlights
White LED Driver for large LCD
Panels (DCDC Converter type)
BD9394FP, BD9394EFV
âGeneral Description
BD9394FP, BD9394EFV is a high efficiency driver for
white LEDs and designed for large LCDs. This IC is
built-in a boost DCDC converters that employ an array of
LEDs as the light source. BD9394FP, BD9394EFV has
some protect function against fault conditions, such as
the over-voltage protection (OVP), the over current limit
protection of DCDC (OCP), the short circuit protection
(SCP), the open detection of LED string. Therefore
BD9394FP, BD9394EFV is available for the fail-safe
design over a wide range output voltage.
âKey Specification
 Operating power supply voltage range: 9.0V to 35.0V
 LED minimum current
30mA
 LED maximum current:
150mA
 Oscillator frequency:
150kHz (RT=100kΩ)
 Operating Current:
4.5mA (Typ.)
Operating temperature range:
-40â to +85â
âApplications
TV, Computer Display, Notebook, LCD Backlighting
âFeatures
 4ch LED constant current driver and DC/DC converter
 Maximum LED Current: 150mA
 LED Feedback Voltage: 0.37V (@NADIM=2.62V),
so lower heat. Adjustable Feed Back Voltage
by following LED Current setting.
 ±2% LED current accuracy (NADIM=2.62V,
when each LED is set to 100mA)
 Analog current (Linear) dimming at NADIM pin
 LED pin rating 60V
 Individual detection and individual LED OFF for both
open and short circuits
 Built-in ISET pin short-circuit protection circuit
 Set Soft-Start time by external capacitor.
 FETâs Gate (N pin) is driven by 5.8V swing
 Built-in Vout discharge circuit for shutdown
 Built-in Vout overvoltage protection (OVP) /
reduced voltage protection (SCP) circuit
 Adjustable LED Short Protection Voltage
by LSP terminal
 HSOP20, HTSSOP-B24 package with high heat
radiation efficiency
âPackage
HSOP20
HTSSOP-B24
W(Typ.) x D(Typ.) x H(Max.)
14.90mm x 7.80mm x 2.10mm
7.80mm x 7.60mm x 1.00mm
â Typical Application Circuit (4 light with PWM)
VIN
VIN
Inductor
Diode
Fig.1(a) HSOP20
CIN
FET
PGND
AGND
REG58
COUT
REG58
CREG
RN2
RCS
DN RN1
RRT
ROVP1
ROVP2
COVP
RFB CFB1
RLSP1
RLSP2
CFB2
CLSP
CSS
RISET
CAUTO
NADIM
FIN1, 2
REG58
N
DCDC_GND
CS
RT
OVP
FB
LSP
SS
ISET
AUTO
NADIM
STB
VCC
LED4
LED3
LED_GND
LED2
LED1
PWM
AGND
ON/OFF
RVCC
CVCC
CLED4
CLED3
CLED2
CLED1
PWM
Fig.1(b) HTSSOP-B24
Fig.2 Typical Application Circuit
âProduct structureï¼Silicon monolithic integrated circuit âThis product is not designed protection against radioactive rays
.www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ã»14ã»001
1/28
TSZ02201-0F1F0C100180-1-2
09.Nov.2012 Rev.002
|
▷ |