|
BD9123MUV_12 Datasheet, PDF (1/22 Pages) Rohm – 2.7V to 5.5V, 1.2A 1ch Synchronous Buck Converter integrated FET | |||
|
Datasheet
2.7V to 5.5V, 1.2A 1ch
Synchronous Buck Converter integrated FET
BD9123MUV
âGeneral Description
ROHMâs high efficiency step-down switching
regulator BD9123MUV is a power supply designed to
produce a low voltage including 0.85 to 1.2 volts
from 5.5/3.3 volts power supply line. Offers high
efficiency with our original pulse skip control
technology and synchronous rectifier. Employs a
current mode control system to provide faster
transient response to sudden change in load.
âFeatures
â Offers fast transient response with current mode
PWM control system.
â Offers highly efficiency for all load range with
synchronous rectifier (Nch/Pch FET) and SLLM
(Simple Light Load Mode)
â Incorporates output voltage inside control
function.(3 bit)
â Incorporates PGOOD function.
â Incorporates soft-start function.
â Incorporates thermal protection and ULVO
functions.
â Incorporates short-current protection circuit with
time delay function.
â Incorporates shutdown function Icc=0µA(Typ.)
âKey Specifications
ï® Input voltage range:
ï® Output voltage range:
ï® Output current:
ï® Switching frequency:
ï® Pch FET ON resistance:
ï® Nch FET ON resistance:
ï® Standby current:
ï® Operating temperature range:
2.7V to 5.5V
0.85V to 1.2V
1.2A (Max.)
1MHz(Typ.)
0.35Ω(Typ.)
0.25Ω(Typ.)
0μA (Typ.)
-40â to +95â
âPackage
VQFN016V3030:
3.00mm x 3.00mm x 1.00mm
âApplications
Power supply for LSI including DSP, Micro computer
and ASIC
âTypical Application Circuit
VCC
Cin
VOUT
VID<2:0>
RITH
CITH
EN
VOUT
VCC,PVCC
PGOOD
VID<2:0)
ITH
SW
GND,PGND
VCC
RPG
L
ESR
CO
VOUT
RO
Fig.1 Typical Application Circuit
âProduct structureï¼Silicon monolithic integrated circuit âThis product is not designed protection against radioactive rays.
www.rohm.com
© ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
1/20
TSZ02201-0J3J0AJ00120-1-2
02.MAR.2012 Rev.001
|
▷ |