|
BD9106FVM_09 Datasheet, PDF (1/29 Pages) Rohm – High-efficiency Step-down Switching Regulators with Built-in Power MOSFET | |||
|
Single-chip built-in FET type Switching Regulator Series
High-efficiency Step-down
Switching Regulators
with Built-in Power MOSFET
BD9106FVM,BD9107FVM,BD9109FVM,BD9110NV,BD9120HFN
No.09027EAT33
âDescription
ROHMâs high efficiency step-down switching regulators (BD9106FVM,BD9107FVM,BD9109FVM,BD9110NV,BD9120HFN)
are the power supply designed to produce a low voltage including 1 volts from 5/3.3 volts power supply line. Offers high
efficiency with our original pulse skip control technology and synchronous rectifier. Employs a current mode control
system to provide faster transient response to sudden change in load.
âFeatures
1) Offers fast transient response with current mode PWM control system.
2) Offers highly efficiency for all load range with synchronous rectifier (Nch/Pch FET)
and SLLMTM (Simple Light Load Mode)
3) Incorporates soft-start function.
4) Incorporates thermal protection and ULVO functions.
5) Incorporates short-current protection circuit with time delay function.
6) Incorporates shutdown function
7) Employs small surface mount package
MSOP8 (BD9106FVM,BD9107FVM,BD9109FVM), HSON8 (BD9120HFN), SON008V5060 (BD9110NV)
âUse
Power supply for LSI including DSP, Micro computer and ASIC
âLine up
Parameter
Input Voltage
Output Voltage
Output Current
UVLO threshold Voltage
Short-current protection
with time delay function
Soft start function
Standby current
Operating Temperature Range
Package
BD9106FVM
4.0ï½5.5V
Adjustable
(1.0ï½2.5V)
0.8A Max.
3.4V Typ.
-25ï½+85â
BD9107FVM
4.0ï½5.5V
Adjustable
(1.0ï½1.8V)
1.2A Max.
2.7V Typ.
-25ï½+85â
MSOP8
BD9109FVM
4.5ï½5.5V
3.30±2%
0.8A Max.
3.8V Typ.
built-in
built-in
0μA Typ.
-25ï½+85â
BD9110NV
4.5ï½5.5V
Adjustable
(1.0ï½2.5V)
2.0A Max.
3.7V Typ.
-25ï½+105â
SON008V5060
BD9120HFN
2.7ï½4.5V
Adjustable
(1.0ï½1.5V)
0.8A Max.
2.5V Typ.
-25ï½+85â
HSON8
âOperating Conditions (Ta=25â)
Parameter
BD9106FVM BD9107FVM BD9109FVM BD9110NV BD9120HFN
Symbol
Unit
Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.
VCC voltage
PVCC voltage
VCC *1 4.0 5.5 4.0 5.5 4.5 5.5 4.5 5.5 2.7 4.5
V
PVCC *1 4.0 5.5 4.0 5.5 4.5 5.5 4.5 5.5 2.7 4.5
V
EN voltage
SW average output current
EN
Isw *1
0
VCC
0
VCC
0
VCC
0
VCC
0
VCC
V
-
0.8
-
1.2
-
0.8
-
2.0
-
0.8
A
*1 Pd should not be exceeded.
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
1/28
2009.05 - Rev.A
|
▷ |