|
BD8964FVM_12 Datasheet, PDF (1/18 Pages) Rohm – 4.0V to 5.5V, 1.2A 1ch Synchronous Buck Converter Integrated FET | |||
|
4.0V to 5.5V, 1.2A 1ch
Synchronous Buck Converter Integrated FET
BD8964FVM
âGeneral Description
ROHMâs high efficiency step-down switching
regulator BD8964FVM is a power supply designed
to produce a low voltage including 1 volts from 5/3.3
volts power supply line. Offers high efficiency with
synchronous rectifier. Employs a current mode
control system to provide faster transient response
to sudden change in load.
âFeatures
ï® Offers fast transient response with current mode
PWM control system.
ï® Offers highly efficiency for all load range with
synchronous rectifier (Nch/Pch FET)
ï® Incorporates soft-start function.
ï® Incorporates thermal protection and ULVO
functions.
ï® Incorporates short-current protection circuit with
time delay function.
ï® Incorporates shutdown function
âKey Specifications
ï® Input voltage range:
ï® Output voltage range:
ï® Output current:
ï® Switching frequency:
ï® Pch FET ON resistance:
ï® Nch FET ON resistance:
ï® Standby current:
ï® Operating temperature range:
4.0V to 5.5V
1.0V to 1.8V
1.2A (Max.)
1.0MHz(Typ.)
350mΩ(Typ.)
250mΩ(Typ.)
0μA (Typ..)
-25â to +85â
âPackages
MSOP8
2.90mm x 4.00mm x 0.83mm
âApplication
Power supply for LSI including DSP, Micro computer
and ASIC
âTypical Application Circuit
Cin
L
VCC
VCC,PVCC
EN
SW
VOUT
VOUT
VOUT
ESR
RO
ITH
GND,PGND
CO
RITH
CITH
Fig.1 Typical application
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
© ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product is not designed protection against radioactive rays.
1/16
TSZ02201-0J3J0AJ00050-1-2
02.MAR.2012 Rev.001
|
▷ |