|
BD89630EFJ_12 Datasheet, PDF (1/25 Pages) Rohm – Synchronous Buck Converter integrated FET | |||
|
Datasheet
2.7V to 5.5V, 2A 1ch
Synchronous Buck Converter integrated FET
BD89630EFJ
âGeneral Description
ROHMâs high efficiency step-down switching regulator
BD89630EFJ is a power supply designed to produce a
low voltage including 1 volts from 5.5/3.3 volts power
supply line. Offers high efficiency with synchronous
rectifier. Employs a current mode control system to
provide faster transient response to sudden change in
load.
âFeatures
ï® Offers fast transient response with current mode
PWM control system.
ï® Offers highly efficiency for all load range with
synchronous rectifier (Nch/Pch FET)
ï® Incorporates soft-start function.
ï® Incorporates thermal protection and ULVO
functions.
ï® Incorporates short-current protection circuit with
time delay function.
ï® Incorporates shutdown function
âApplications
Power supply for LSI including DSP, Micro computer
and ASIC
âKey Specification
ï® Input voltage range:
ï® Output voltage range:
ï® Average output Current:
ï® Switching frequency:
ï® Pch FET ON resistance:
ï® Nch FET ON resistance:
ï® Standby current:
ï® Operating temperature range:
2.7V to 5.5V
1.0V to 2.5V
2A(Max.)
1MHz(Typ.)
145mΩ(Typ.)
80mΩ(Typ.)
5μA (Typ.)
-25â to +85â
âPackage
HTSOP-J8
(Typ.) (Typ.) (Max.)
4.90mm x 6.00mm x 1.00mm
âTypical Application Circuit
HTSOP-J8
VCC
Cin
L
EN
VCC
SW
VADJ
ADJ
COMP
GND
CO
RCOMP
CCOMP
Fig.1 Typical Application Circuit
VOUT
RFB1
VADJ
RFB2
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
©2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product is not designed protection against radioactive rays.
1/21
TSZ02201-0J3J0AJ00270-1-2
2012.08.28 Rev.001
|
▷ |