|
BD8671KN Datasheet, PDF (1/5 Pages) Rohm – Silicon Monolithic Integrated Circuit | |||
|
1/4
STRUCTURE
PRODUCT NAME
ï¼
Silicon Monolithic Integrated Circuit
ï¼
DC/DC converter IC for camera module for car navigation system
MODEL NAME
BLOCK DIAGRAM
âFEATURESï¼
ï¼ BD8671KN
ï¼
Fig. - 2
ã»+3.3V output Step down DC/DC converter for asynchronous rectification system
ã»+12V output Boost DC/DC converter for asynchronous rectification system
ã»-5V output Voltage control charge pump for reversing type for negative voltage
ã»Soft start function
ã»Building in low voltage and over voltage protection function
ã»Building in terminal RT OPEN/Short protection
ã»The frequency can be set by external resistance
ã»Concentrated protection control with built-in sequencer
ã»VQFN-28 package
âABSOLUTE MAXIMUM RATING:ï¼Ta=25âï¼
Parameter
VIN supply voltage
PVIN supply voltage
Input terminal voltage 1*1
Input terminal voltage 2*2
Input terminal voltage 3*3
Input terminal voltage 4*4
Output terminal voltage 1*5
Output terminal voltage 2*6
Output terminal voltage 3*7
Output terminal voltage 4*8
Output terminal voltage 5*9
Power dissipation
Operating temperature
Storage temperature
Symbol
Limits
Unit
VIN
-0.3 ï½ +18.0
V
PVIN
-0.3 ï½ VIN
V
VIN1
-0.3 ï½ VIN
V
VIN2
-0.3 ï½ +20.0
V
VIN3
-0.3 ï½ +20.0
V
VIN4
-10.0 ï½ +0.3
V
VOUT1
-0.3 ï½ VIN
V
VOUT2
-0.3 ï½ PVIN
V
VOUT3
-0.3 ï½ +20.0
V
VOUT4
-0.3
ï½
VIN3*10
V
VOUT5
VIN4 ï½ +0.3
V
Pd
0.725*11
W
Topr
-40 ï½ +85
â
Tstg
-55 ï½ +150
â
*1 FB12ãSS12ãTEST1ãTEST2ãTEST3ãRTãCTL1ãCTL2ãCTL3ãSS33ãV33 terminal voltage *2 V12 terminal voltage *3 V12IN terminal voltage
*4 MV8 terminal voltage *5 FC12 terminal voltage *6 SW33 terminal voltage *7 SW12 terminal voltage
*8 V8ãCP terminal voltage *9 MV5ãCM terminal voltage
*10 V8 terminal voltage ABSOLUTE MAXIMUM RATING is VIN3 or 10V is low. Between V8 terminal voltage and MV5 terminal voltage ABSOLUTE MAXIMUM RATING is 15V.
*11 70mmÃ70mm, thickness1.6mm, less than 3% share of copper foil when implementing glass epoxy board.
Operating at higher than Ta=25â, 5.8mW shall be reduced per 1
âOPERATION CONDITION (Please set the power-supply voltage in consideration of a power dissipation.)
Parameter
Symbol
MIN
TYP
MAX
Unit
VIN supply voltage
VIN
4.5
6.0
9.0
V
This product is not designed for protection against radioactive rays.
REV. A
|
▷ |