|
BD8649EFV Datasheet, PDF (1/14 Pages) Rohm – Flexible Step-down Switching Regulator with Built-in Power MOSFET | |||
|
Single-chip Type with Built-in FET type Switching Regulators
Flexible Step-down
Switching Regulator
with Built-in Power MOSFET
BD8649EFV
No.10027EAT45
âDescription
The BD8649EFV is a synchronous step-down switching regulator that integrates 2 low resistances N-channel MOSFETs.
It achieves 3A continuous output current over a wide input supply range.
Current mode operation provides fast transient response and easy phase compensation.
âFeature
1) Synchronous rectification with built-in FET type DC/DC converter
2) 3.0A output current
3) Range of operation power-supply voltage 4.5Vï½18V
4) Reference voltage FB 0.8V±1%
5) Programmable frequency 100kHzï½600kHz
6) Over current protection function
7) Thermal shutdown function
8) Under voltage protection
9) Soft start time out function / Soft start delay circuit
10) Programmable OFFLATCH time
âApplications
FPD,DVD,HDD Recorder,STB,Amusement,Other
âAbsolute maximum rating (Ta=25â)
Parameter
Symbol
Ratings
Unit
Input supply voltage
VIN
20
V
BOOT terminal voltage
VBOOT
28
V
EN terminal voltage
Input terminal voltage
VEN
GND-0.3 ï½ VIN+0.3
V
VINP*1
GND-0.3 ï½ 7
V
SW terminal voltage
Output current
Power dissipation
VSW
GND-0.3 ï½ VIN+0.3
V
IOUT
3.5*2
A
Pd
3.2*2
W
Operating temperature
Topr
-20 ï½ 85
â
Storage temperature
Tstg
-55 ï½ 150
â
*1 VINP Application terminal: SS/DELAY, FB, FC, RT, PSET
*2 (70mmÃ70mm, thickness 1.6mm, and four layer glass epoxy substrates)When mounting substrate and the package
back exposure part are connected with solder
Operating at higher than Ta=25â, 25.6mW shall be reduced per 1
âOperation condition
Parameter
Symbol
Ratings
Min.
Typ.
Max.
Unit
Input supply voltage
VIN
4.5
-
18.0
V
Output current
IOUT
-
-
3.0
A
* This product is not designed for protection against radioactive rays.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/13
2010.09 - Rev.A
|
▷ |