BD8629FS_09 Datasheet, PDF (1/12 Pages) Rohm – FET Controller Type 3ch System Power Supply ICs

System Power Supply for TV Series
FET Controller Type
3ch System Power Supply ICs
BD8629FS
No.09034EAT07
●Description
BD8629FS has realized the high performance and reliability required as a power supply for thin-screen TV.
With built-in FET 1ch current mode control, the DC/DC Converter series has the advantage of high-speed load response and
wide phase margin.
Due to the high-speed load response, it is most suitable for TV-purpose processors with increasingly high performance, and
due to the wide phase margin it leaves a good margin for board pattern & constant setting and so facilitates its application
design.
As a high-reliability design, it has various built-in protection circuits (overcurrent protection, output voltage abnormal
protection, thermal protection, and off-latch function at the time of abnormality etc.), therefore as an advantage it does not
easily damage in every possible abnormal condition such as all-pin short circuit test etc. and hence most suitable for
thin-screen TV which requires the high reliability.
●Features
1) High efficiency in all load area
2) 2.0A output current
3) Low RDS(ON) internal switches (PchMOS:170mΩ, NchMOS:130mΩ)
4) ±1% reference voltage accuracy
5) Programmable frequency : 250kHz-1MHz
6) Terminal RT OPEN/SHORT detecting function
7) Over current protection function
8) Output over voltage/low voltage protection function (over : FB > VREF +60mV , low : FB < VREF -60mV)
9) Timer off latch function in abnormal circumstances
10) Thermal shutdown function
11) Under voltage protection
12) Soft start/start delay circuit
13) Soft start time out function
14) SSOP-A16 package
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
1/11
2009.05 - Rev.A