BD8628EFV_09 Datasheet, PDF (1/15 Pages) Rohm – FET Controller Type 3ch System Power Supply ICs

System Power Supply for TV Series
FET Controller Type
3ch System Power Supply ICs
BD8628EFV, BD8624EFV
No.09034EAT06
●Description
BD8628EFV / BD8624EFV have realized the high performance and reliability required as a power supply for thin-screen
TV.
With built-in FET 1ch current mode control, the DC/DC Converter series has the advantage of high-speed load response
and wide phase margin.
Due to the high-speed load response, it is most suitable for TV-purpose processors with increasingly high performance, and
due to the wide phase margin it leaves a good margin for board pattern & constant setting and so facilitates its application
design.
As a high-reliability design, it has various built-in protection circuits (overcurrent protection, output voltage abnormal
protection, thermal protection, and off-latch function at the time of abnormality etc.), therefore as an advantage it does not
easily damage in every possible abnormal condition such as all-pin short circuit test etc. and hence most suitable for
thin-screen TV which requires the high reliability.
●Features
1) 11ch synchronous rectification step-down system DC/DC converter
2) Soft start, soft off function
3) Built-in low voltage / overvoltage protection function
4) Built-in overcurrent protection function
5) Frequency setting by external resistance is available. (RT terminal)
6) Protection time setting by external resistance is available. (RSET terminal)
7) Built-in RT / RSET terminal open/short protection function
8) Protection control with built-in sequencer
9) Built-in adjustment function time of off latch
10) Built-in error state detection signal output function
11) Built-in tracking function
12) Corresponded to protecting bus
13) Load current Maximum 3A
14) HTSSOP-B24 Package
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
1/14
2009.05 - Rev.A