BD8210EFV Datasheet, PDF (1/5 Pages) Rohm – Silicon Monolithic Integrated Circuit

1/4
Structure
Silicon Monolithic Integrated Circuit
Product Series
Type
6ch Power Driver for Car Audio
BD8210EFV
Feature
ಛ௕
ɾThe SPINDLE driver and the SLED driver can highly effective drive with PWM drive system.
ɾThe actuator driver and the loading driver are linear BTL drive and are achieving a low
noise power.
˓Absolute maximum ratings(Ta=25ˆ)
Parameter
Symbol
Limits
Unit
POWER MOS power supply voltage
417.
413/'
4-3/'



V
7DD
7.'$3/'

Pre-block / BTL / Loading driver power-block power supply voltage


V
7.5,3/'
7.@4


Input terminal voltage1
7*/


7$$

V
Input terminal voltage2
7*/


7.@4

V
Power dissipation
1E




W
Operating temperature range
5PQS

ʙ

ˆ
Storage temperature
5TUH

ʙ

ˆ
Junction temperature
5KNBY



ˆ
#1 POWER MOS output terminals are contained.
#2 It shows each terminal of CTL1ɼCTL2ɼVcɼLDVcɼLDINɼTINNɼand FINN.
#3 It shows each terminal of HU+ɼHU-ɼHV+ɼHV-ɼHW+ɼHW-ɼSL1INNɼSL2INNɼSPINɼSPVMɼand VM_S.
#4 Ta=25ˆɼPCB (70mmʷ70mmʷ1.6mm,occupied copper foil is less than 3%,glass epoxy standard board) mounting.

Reduce power by 16mW for each degree above 25ˆ.
˓Operating conditions (Ta=-40ʙ+85ˆ)
(Set the power supply voltage taking allowable dissipation into considering.)
Parameter
Symbol
MIN
TYP
MAX
Unit
Pre-block / Loading driver power-block power supply voltage
Vcc
6
8
10
V
PWM-part Pre-block power supply voltage
VM_S
6
8
Vcc
V
Spindle driver powerblock power supply voltage
SPVM, SPRNF
6
8
VM_S
V
Sled motor driver powerblock power supply voltage
Actuator driver powerblock Power supply voltage
SLRNF
6
VMFCRNF
4
VMTKRNF
8
VM_S
V
8
Vcc
V
Install detect resistance between SPVM, SPRNF, SLRNF and VM_S, and between VMFCRNF, VMTKRNF and AVM.
Status of this document
The Japanese version of this document is the formal specification. A customer may use this translation version only for a reference to help reading the formal version.
If there are any differences in translation version of this document, formal version takes priority.
Be careful to handle because the content of the description of this material might correspond to the labor (technology in the design, manufacturing,and use) in foreign country
exchange and Foreign Trade Control Law.
A radiation is not designed.
REV. A