|
BD82103GWL Datasheet, PDF (1/5 Pages) Rohm – Silicon Monolithic Integrated Circuit | |||
|
Structure
Product Name
Type
Features
1/4
Silicon Monolithic Integrated Circuit
LED Driver for cellular phone
BD82103GWL
ã» 2light or 3light parallel LED driver is mounted
ã» 16-step LED current adjust function
ã» Inter-LED relative current accuracy: 5% or less
ã» Driving control via a single-line digital control interface
ã» Automatic transition charge pump type DC/DC converter (Ã1,Ã1.5, Ã2)
ã» High efficiency achieved (90% or more at maximum)
ã» It transits for the most suitable power operating by the LED terminal process
of the 3rd light when 2 light driving
ã» Various protection functions such as output voltage protection and thermal shutdown circuit are
mounted.
ã» Package : UCSP50L1 (Thick 0.55mm MAX, Pin pitch 0.4mm) CSP11pin package
âAbsolute Maximum Ratings (Ta=25ºC)
Parameter
Symbol
Rating
Unit
Power supply voltage
VMAX
7
V
Power dissipation
Pd
730
mW
Operating temperature range
Topr
-30 ~ +85
ºC
Storage temperature range
Tstg
-55 ~ +150
ºC
Note 1) The measurement value which was mounted on the PCB by ROHM.
When a glass epoxy substrate (70mm à 70mm à 1.6mm) has been mounted, this loss will decrease
5.84mW/ºC if Ta is higher than or equal to 25ºC.
âOperating Conditions (Ta = -30 ~ 85 oC)
Parameter
Symbol
Limits
Unit
Operating power supply voltage
VBAT
2.7 ~ 5.5
V
*This chip is not designed to protect itself against radioactive rays.
REV. B
|
▷ |