|
BD8203EFV Datasheet, PDF (1/22 Pages) Rohm – 5ch System Moter Driver | |||
|
System Motor Driver IC for CD/DVD players
5ch
System Moter Driver
BD8203EFV
No.10011EAT02
âDescription
BD8203EFV is 5ch system motor driver for CD/DVD. A linear BTL method can be adopted for all 5ch and a low noise be
designed. Built-in 5V regulator, a changeable regulator, and a general-purpose operational amplifier , and it is the best for the
system design for car audio.
âFeatures
1) Linear BTL method is adopted for the actuator driver and the DC motor driver and a low noise is achieved.
2) Loading driver 1CH
3) Built-in regulator 2CH (1ch output changeability)
4) MUTE function and Standby function
5) Built-in general-purpose operational amplifier 1CH
6) Built-in internal operational amplifier for the voltage detection between driver outputs and for Vc standard
âApplications
Car Audio
âAbsolute Maximum Ratings
Parameter
Symbol
Limits
Unit
Power supply voltage
PREVCC,PVCC1,PVCC2,
REGVARVCC
15
V
Input terminal voltage1
VIN1*1
PREVCC
V
Input terminal voltage2
VIN2*2
REG5
V
Output terminal voltage
VOUT*3
REG5
V
Operating temperature range
Topr
-40~85
â
Storage temperature
Tstg
-55~150
â
Junction temperature
Tjmax
150
â
*1 Input terminal 1 ï¼ REGRST
*2 Input terminal 2 ï¼ REGCTL,MUTE123,MUTE4,VCI,RVS,FWD,IN1,IN2,IN3,IN4,OPIN+,OPIN-,VCTL
*3 Output terminal ï¼ VCO,TSDM,VSPDL
âPower Dissipation
Parameter
Symbol
HTSSOP-B40
Power dissipation
Pd (#1)
4.7W
#1 Ta =25âï¼Standard board mounting
(70mmÃ70mmÃ1.6mm,occupied copper foil is less than 3%, 4 glass epoxy layer substrate, 70mmx70mm of the back copper foil area)
Reduce power by 34.6mW for each degree above 25â.
âRecommended Operating Conditions (Ta=-40~+85â)
(Set the power supply voltage taking allowable dissipation into considering.)
Parameter
Symbol
Driver part Pre steps and regulator 1 power-supply voltage
PreVcc
Driver part power steps power-supply voltage
PVcc1,PVcc2
Power steps of two regulators power-supply voltage
REGVARVcc
MIM.
7.5
4.5
4.5
TYP.
8
8
5
MAX. Unit
14
V
PreVcc V
PreVcc V
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/21
2010.02 - Rev.A
|
▷ |