BD80C0AFPS-M Datasheet, PDF (1/22 Pages) Rohm – Single-Output LDO Regulator 1A Fixed Output LDO Regulators

Datasheet
Single-Output LDO Regulator
1A Fixed Output LDO Regulators
BD80C0AFPS-M BD90C0AFPS-M
●General Description
The BD80C0AFPS-M and BD90C0AFPS-M are
low-saturation regulators. These ICs have built in over
current protection to protect the device when output is
shorted and thermal shutdown circuit to protect the
device during over load conditions.
●Features
„ Output Current capability : 1A
„ High Output Voltage Precision: ±1%
„ Low saturation with PDMOS output
„ Built-in over-current protection circuit that prevents
the destruction of the IC due to output short circuits
„ Built-in thermal shutdown circuit for protecting the IC
from thermal damage due to overloading
„ Low ESR Capacitor
●Key Specification
„ Supply Voltage range:
„ Output voltage
BD80C0AFPS-M:
BD90C0AFPS-M:
„ Output current:
„ Operating temperature range:
Vo+1.0V to 26.5V
8.0V
9.0V
1A
-40℃≤Ta≤+105℃
●Package
TO252S-3
W (Typ.) x D (Typ.) x H (Max.)
6.50mm x 9.50mm x 1.30mm
●Applications
Audiovisual equipments, FPDs, televisions, personal
computers or any other consumer device
●Typical Application Circuit
Vcc
Vo
Vcc Cin
GND
TO252S-3
Cout
●Ordering Information
Figure 1. Typical Application Circuit
BD x x C 0 AFP S -
E2
Part Number
Output Voltage
80:8.0V Output
90:9.0V Output
Current capacity
C0A:1A
Package
Packaging and forming specification
FPS:TO252S-3 _{E2: Embossed tape and reel}
●Lineup
Maximum Output
Current (Max.)
1A
Output Voltage
(Typ.)
8.0V
9.0V
Package
Orderable Part Number
BD80C0AFPS-M -E2
TO252S-3 Reel of 2000
BD90C0AFPS-M -E2
○Product structure：Silicon monolithic integrated circuit
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product is not designed protection against radioactive rays.
1/19
TSZ02201-0T2T0AN00090-1-2
21.Feb.2013 Rev.001