|
BD7700GU_11 Datasheet, PDF (1/13 Pages) Rohm – Charge Pump type for Flash | |||
|
System LED Drivers for Mobile Phones
Charge Pump type
for Flash
BD7700GU
No.11041EAT19
âDescription
BD7700GU is a maximum of 300mA LED flash (three-channel total) driver IC. Flash mode and torch mode are controllable
by two external control signals. The flash mode timer ability for a maximum of 1s is carried, and management of flash
lighting time is easy and safe.
âFeatures
1) Current regulation for LED
2) 3ch High side current Driver
3) Flash LED High side Current driver (Max 100mA@1ch)
4) Torch LED High side Current driver (Max 20mA@1ch)
5) Indicate LED High side Current driver (Max 1mA)
6) High efficiency up to 80%
7) 2port control Flash and Torch and Indicate mode
8) Charge pump step-up DC/DC converter (Max 300mA) Three charge pump mode (Ã1, Ã1.5, Ã2.0)
9) Automatically transition to each mode
10) Over-voltage protection / In rush current prevention (soft start) / Over current limiter
11) Under Voltage Lockout threshold / Thermal shutdown
12) Small and thin CSP package
âApplications
Flash and torch of camera for mobile phone
âAbsolute Maximum Ratings (Ta=25â)
Parameter
Symbol
Ratings
Unit
Maximum applied voltage
VMAX
7
V
Input voltage
Vdin
GND-0.3 ~ VBAT+0.3
V
Power dissipation
Pd
1062.5 (Note1)
mW
Operating temperature range
Topr
-30 ~ +85
â
Storage temperature range
Tstg
-55 ~ +150
â
(Note1) The measurement value, which was mounted on the PCB by ROHM.
Temperature deleting : 8.5mW/â from Ta>25â
âOperating conditions (Ta=-30 ~ 85â)
Parameter
Symbol
Ratings
Unit
Battery Power Supply voltage
VBAT
2.7 - 5.5
V
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/12
2011.04 - Rev.A
|
▷ |