BD7561G_12 Datasheet, PDF (1/21 Pages) Rohm – High Voltage Operation CMOS Operational Amplifiers:Input/Output Full Swing

ROHM’s Selection Operational Amplifier/Comparator Series
High Voltage Operation CMOS
Operational Amplifiers:Input/Output Full Swing
BD7561G,BD7561SG,BD7541G,BD7541SG,
BD7562F/FVM,BD7562SF/FVM,BD7542F/FVM,BD7542SF/FVM
No.09049EBT05
●Description
High voltage operable CMOS Op-Amp BD7561/BD7541 family and BD7562/BD7542 family Integrate one or two independent
input-output fullswing Op-amps and phase compesation capacitorson a single chip.
Especially, characteristics are wide operating voltagerange of +5[V]～+14.5[V](single power supply),low supply current and little
input bias current.
High speed
Single
(BD7561SG ： Operation guaranteed up t o + 105℃)
Dual
(BD7562SF/FVM ： Operation guaranteed up to + 105℃)
Low power
Single
(BD7541SG ： Operation guaranteed up to + 105℃)
Dual
(BD7542SF/FVM ： Operation guaranteed up to + 105℃)
●Features
1) Wide operating supply voltage(＋5[V]～＋14.5[V])
2) ＋5[V]～＋14.5[V](single supply)
±2.5[V]～±7.25[V](split supply)
3) Input and Output full swing
4) Internal phase compensation
5) High slew rate (BD7561 family, BD7562 family)
6) Low supply current (BD7541 family, BD7542 family)
7) High large signal voltage gain
8) Internal ESD protection
Human body model (HBM) ±4000[V](Typ.)
9) Wide temperature range
-40[℃]～＋85[℃] (BD7561G,BD7562 family, BD7541G,BD7542 family)
-40[℃]～＋105[℃] (BD7561SG,BD7562S family, BD7541SG,BD7542S family)
●Pin Assignment
IN+ ¹
VSS ²
+
-
IN- 3
5 VDD
4 OUT
OUT1 ¹
IN1- ²
IN1+ 3
VSS 4
-^CH1+
CH2
+-
8 VDD
7 OUT2
6 IN2-
5 IN2+
SSOP5
BD7561G
BD7561SG
BD7541G
BD7541SG
SOP8
BD7562F
BD7562SF
BD7542F
BD7542SF
M SOP8
BD7562FVM
BD7562SFVM
BD7542FVM
BD7542SFVM
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
1/20
2012.09 - Rev.B