BD6883GUL Datasheet, PDF (1/5 Pages) Rohm – Silicon Monolithic Integrated Circuit

1/4
STRUCTURE
PRODUCT SERIES
TYPE
FEATURES
Silicon Monolithic Integrated Circuit
0.5ch Motor Driver for Digital Still Camera
BD6883GUL
・Built in 0.5 Constant-Voltage Drivers
Absolute maximum ratings (Ta=25°C)
Parameter
Symbol
Limit
Unit
Power supply voltage
VCC
-0.5 to +6.5
V
Control input voltage
VIN
-0.5 to VCC+0.5
V
Input voltage for
Constant-Voltage setting
VLIM
-0.5 to VCC+0.5
V
Power dissipation
Pd
510^※1
mW
Operating temperature range
Topr
-25 to +85
°C
Junction temperature
Tjmax
+150
°C
Storage temperature range
Tstg
-55 to +150
°C
Half-bridge output current
Iout
-200 to +200^※2
mA
※¹ _{VIN is control input voltage (IN).}
※² _{Reduced by 4.08mW/°C over 25°C, when mounted on a glass epoxy board (50mm  58mm  1.75mm; 8 layers).}
※³ _{Must not exceed Pd, ASO, or Tjmax of 150°C.}
Operating Conditions (Ta= -25°C to +85°C)
Parameter
Symbol Min.
Power supply voltage
VCC
2.5
Control input voltage
VIN
0
Input voltage for
Constant-Voltage setting
VLIM
0
H-bridge output current
Iout
-
※⁴ _{Must not exceed Pd or ASO.}
Typ.
Max.
Unit
3.0
5.5
V
-
VCC
V
-
VCC
V
-
150^※4
mA
The product described in this specification is a strategic product (and/or service) subject to COCOM regulations.
It should not be exported without authorization from the appropriate government authorities.
This product isn’t designed for protection against radioactive rays.
Status of this document
REV. A