BD6736FV Datasheet, PDF (1/5 Pages) Rohm – Silicon Monolithic Integrated Circuit

1/4
STRUCTURE
PRODUCT SERIES
TYPE
FEATURES
Silicon Monolithic Integrated Circuit
1ch. Reversible Motor Driver
BD6736FV
・Full-ON type 1ch. H-bridge Driver
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
Limit
Unit
Power supply voltage
VCC
-0.5 to +10.0
V
Motor power supply voltage
VM
-0.5 to +10.0
V
Charge pump step-up
VBST
-0.5 to +15.0
V
power supply voltage
Control input voltage
Power dissipation
VIN
-0.5 to VCC+0.5
V
Pd
930^※1
mW
Operating temperature range
Topr
-30 to +75
°C
Junction temperature
Tjmax
150
°C
Storage temperature range
Tstg
-55 to +150
°C
H-bridge output current DC
Iout
-1000 to +1000^※2
mA
H-bridge output current (100msec)
Iopeak
-3200 to +3200^※2
mA
※1 _{Reduced by 7.44mW/°C over 25°C, when mounted on a glass epoxy board (70mm × 70mm × 1.6mm)}
※2 _{Must not exceed Pd, ASO, or Tjmax of 150°C.}
zOperating Conditions (Ta= -30°C to +75°C)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Power supply voltage
VCC
2.0
5.0
9.0
V
Motor power supply voltage
VM
2.0
5.0
9.0
V
Control input voltage
VIN
0
-
VCC
V
Logic input frequency
FIN
0
-
100
kHz
Min. logic pulse width
TIN
0.5
-
-
μs
The product described in this specification is a strategic product (and/or service) subject to COCOM regulations.
It should not be exported without authorization from the appropriate government authorities.
This product isn’t designed for protection against radioactive rays.
Status of this document: The Japanese version of this document is the formal specification. A customer may use this translation
version only for a reference to help reading the formal version. If there are any differences in translation version of this document,
formal version takes priority.
REV. C