BD6393FP-E2 Datasheet, PDF (1/9 Pages) Rohm – Standard 36V Stepping Motor Drivers

Stepping Motor Driver Series
Standard 36V
Stepping Motor Drivers
BD6393FP, BD6395FP
No.12009EAT05
●Description
BD6393FP,BD6395FP are the simple type that provides the minimum function for driving stepping motor and various
protection circuits.
As for its basic function, it is a low power consumption bipolar PWM constant current-drive driver with power upply’s rated
voltage of 36V and rated output current of 1.2A, 1.5A. There are excitation modes of FULL STEP & HALF STEP &,
QUARTER STEP mode. This series contributes to reduction of mounting area, cost down, safety design.
●Feature
1) Power supply: one system drive (rated voltage of 36V)
2) Rated output current: 0.8A, 1.2A, 1.5A
3) Low ON resistance DMOS output
4) Parallel IN drive mode
5) PWM constant current control (self oscillation)
6) Built-in spike noise cancel function (external noise filter is unnecessary)
7) FULL STEP, HALF STEP, QUARTER STEP
8) Power save function
9) Built-in logic input pull-down resistor
10) Power-on reset function
11) Thermal shutdown circuit (TSD)
12) Over current protection circuit (OCP)
13) Under voltage lock out circuit (UVLO)
14) Over voltage lock out circuit (OVLO)
15) Malfunction prevention at the time of no applied power supply (Ghost Supply Prevention)
16) Electrostatic discharge: 4kV (HBM specification)
17) FIN heat-radiating type HSOP package (BD6393FP/BD6395FP)
18) Pin-compatible line-up (BD6393FP/BD6395FP)
●Application
Laser beam printer, Scanner, Photo printer, FAX, Ink jet printer, Mini printer, Sewing machine, Toy, and Robot etc.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
1/8
2012.02 - Rev.A