English
Language : 

BD63510EFV Datasheet, PDF (1/25 Pages) Rohm – CLK-IN drive mode
Datasheet
Stepping Motor Driver series
Micro step 36V
Stepping Motor Drivers
BD63510EFV
●General Description
BD63510EFV series are stepping motor drivers of 1/16
micro step(sixteenth step) drive. As for its basic
function, it is a low power consumption bipolar PWM
constant current-drive driver with power supply rated
voltage of 36V and rated output current (DC) of 1.0A.
The input interface is CLK-IN type.
There are step modes of Full step & Half step, Quarter
step, Sixteenth step mode by internal DAC (D-A
converter), and for current decay mode, the ratio of
FAST DECAY & SLOW DECAY can be freely set, so the
optimum control conditions for every motor can be
realized. In addition, being able to drive with one system
of power supply makes contribution to the set design’s
getting easy.
● Major Characteristics
■ Range of power supply voltage
8~28 [V]
■ Rated output current
1.0 [A]
■ Rated output current (peak)
1.5 [A]
■ Range of operating temperature
-25~+85 [℃]
■ Output ON resistance (total of upper 1.75 [Ω] (Typ.)
and lower resistors)
● Package
HTSSOP-B28
W(Typ.) x D(Typ.)x H(Max.)
9.70mm x 6.40mm x 1.00mm
● Features
1) Single power supply input (rated voltage of 36V)
2) Rated output current:(DC) 1.0A
3) Low ON resistance DMOS output
4) CLK-IN drive mode
5) PWM constant current control (other oscillation)
6) Built-in spike noise cancel function (external noise
filter is unnecessary)
7) Full step, Half step, Quarter step, Sixteenth step
drive
8) Timing free for changing step modes
9) Current decay mode switching function (linearly
variable FAST/SLOW DECAY ratio)
10) Normal rotation & reverse rotation switching
function
11) Power save function
12) Built-in logic input pull-down resistor
13) Power-on reset function
14) Thermal shutdown circuit (TSD)
15) Over current protection circuit (OCP)
16) Under voltage lock out circuit (UVLO)
17) Over voltage lock out circuit (OVLO)
18) Ghost Supply Prevention (protects against
malfunction when power supply is disconnected)
19) Adjacent pins short protection
20) Inverted mounting protection
21) Microminiature, ultra-thin and high heat-radiation
(exposed metal type) HTSSOP-B28 package
● Application
■ PPC, multi-function printer, laser beam printer, and
ink-jet printer
■ Monitoring camera and WEB camera
■ Sewing machine
■ Photo printer, FAX, scanner and mini printer
■ Toy and robot
● Basic application circuit
CLK 15
CW_CCW 16
MODE0 18
MODE1 19
ENABLE 20
VREF 13
CR 10
MTH 12
TEST1
17
9 GND
14 PS
11
TEST0
6 VCC1
OUT1A
5
2 OUT1B
3
RNF1
4 RNF1S
22 VCC2
24 OUT2A
27
OUT2B
26
RNF2
25 RNF2S
1 GND
Figure 1. BD63510EFV application circuit diagram
○Product structure:silicon monolithic integrated circuit ○It is not the radiation-proof design for this product.
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
1/22
TSZ02201-0P2P0B700690-1-2
18.Mar.2014 Rev.001