|
BD6150MUV_11 Datasheet, PDF (1/29 Pages) Rohm – White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type) | |||
|
LED Drivers for LCD Backlights
White Backlight LED Driver
for Medium to Large LCD Panels
(Switching Regulator Type)
BD6150MUV
No.11040EBT06
âDescription
BD6150MUV is white LED driver IC with PWM step-up DC/DC converter that can boost max 40V and current driver that can
drive max 30mA. The wide and precision brightness can be controlled by external PWM pulse. BD6150MUV has very
accurate current drivers, and it has few current errors between each strings. So, it will be helpful to reduce brightness spots
on the LCD. Small package type is suited for saving space.
âFeatures
1) High efficiency PWM step-up DC/DC converter (fsw=1.25MHz / 0.75MHz)
2) High accuracy & good matching current drivers (MAX30mA/ch)
3) Integrated 50V power Nch MOSFET
4) Soft start
5) Drive up to 10 in series 6strings in parallel
6) Wide input voltage range (4.2V ~ 26V)
7) Rich safety functions
ã»Over-voltage protection
ã»Over current limit
ã»LED terminal open/short protect
ã»External SBD open detect / Output short protection
ã»UVLO
ã»Thermal shutdown
8) Small & thin package (VQFN024V4040) 4.0 Ã 4.0 Ã 1.0mm
âApplications
All middle size LCD equipments backlight of Notebook PC, portable DVD player, car navigation systems, etc.
âAbsolute maximum ratings (Ta=25â)
Parameter
Symbol
Maximum applied voltage 1
VMAX1
Maximum applied voltage 2
VMAX2
Maximum applied voltage 3
VMAX3
Ratings
7
25
30.5
Unit
Condition
V
VREG, ISET, PWMDRV, FSEL,
OCPSET, VDET, TEST
V
LED1, LED2, LED3,
LED4, LED5, LED6
V VBAT, FAILFLAG, PWMPOW
Maximum applied voltage 4
Power dissipation 1
Power dissipation 2
VMAX4
Pd1
Pd2
41
500 *1
780 *2
V SW
mW
mW
Power dissipation 3
Pd3
1510 *3
mW
Operating temperature range
Topr
-40 ~ +85
â
Storage temperature range
Tstg
-55 ~ +150
â
*1 Reduced 4.0mW/â With Ta>25â when not mounted on a heat radiation Board.
*2 1 layer (ROHM Standard board) has been mounted. Copper foil area 0mm2, When itâs used by more than Ta=25â, itâs reduced by 6.2mW/â.
*3 4 layer (JEDEC Compliant board) has been mounted. Copper foil area 1layer 6.28mm2, Copper foil area 2~4layers 5655.04mm2,
When itâs used by more than Ta=25â, itâs reduced by 12.1mW/â.
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/28
2011.06 - Rev.B
|
▷ |