|
BD6062GU_11 Datasheet, PDF (1/16 Pages) Rohm – Chopper type for Flash | |||
|
System LED Drivers for Mobile phones
Chopper type
for Flash
BD6062GU
No.11041EBT13
âDescription
The BD6062GU is 1A Flash LED Driver ICs that can drive 1LED. It is possible to select how to control, 2wired control mode
(Direct Control Mode) or 3wired mode (Register Control Mode). The BD6062GU has original Timer function in 3wired mode
and easily set pre-flash timer and flash timer.
âFeatures
1) 400mA ~ 800mA selectable in Flash mode (Register Control Mode)
2) 50 ~ 200mA Torch mode (Register Control Mode)
3) 800mA in Flash mode (Direct control Mode)
4) 200mA in Torch mode (Direct control Mode)
5) Maximum current of LED is 1A in both Flash and Torch mode
6) 3Wired Mode and Direct control Mode selectable
7) In 3Wired Mode, Pre-Flash Timer and Flash Timer controllable
8) In 3Wired Mode, Flash current and Torch current is controllable
9) Over voltage protection
10) CSP 23pin Small and Thin package
âApplications
Flash and torch of camera for mobile phone
âLine up matrix
Parameter
BD6062GU
Input voltage
Switching Frequency
Maximum LED Current
Package
2.7 ~ 5.5V
480 ~ 720kHz
1A
VCSP85H2
âAbsolute maximum ratings (Ta=25â)
Parameter
Symbol
Ratings
Unit
Condition
Maximum applied voltage
Power dissipation
VMAX
Pd
7
1100 *1
V VBAT, VIO
mW
Operating temperature range
Topr
-30~+85
â
Storage temperature range
Tstg
-55~+150
â
*1 50mm à 58mm à 1.75mm At glass epoxy board mounting. When itâs used by more than Ta=25â, itâs reduced by 11mW/â
âRecommended operating range (Ta= -30â ~ +85â)
Parameter
Power Supply Voltage
Symbol
Min.
VDD
2.7
Ratings
Typ.
3.6
Max.
5.5
Unit
V
*2
Condition
IO Supply Voltage
*2 VBAT ⥠VIO
VIO
1.62
1.8
3.3
V
*2
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/15
2011.05 - Rev.B
|
▷ |