BD555BKFV_13 Datasheet, PDF (1/16 Pages) Rohm – AC/DC Controller IC

Datasheet
BD555BKFV AC/DC Controller IC
for mains dimmable LED lighting
BD555BKFV
●General Description
The BD555BKFV controller AC/DC controller IC can be
used in a wide range of dimmable LED lighting driver
applications. The main target application is dimmable
retro-fit LED lighting, replacing existing incandescent
light bulbs, halogen spot lights, CFL tubes etc.
●Features
 Fixed frequency DC/DC controller (selectable)
 Peak current or average current control (PCC/ACC)
 Dynamic Load Current Controller (DLCC)
 Logarithmic compensation of detected dimming level
 Dimmer detector function
 Anti-flash function when dimmer is OFF
 PWM and analog dimming control supported
 Over Current Protection (OCP)
 Thermal Shutdown protection (TSD)
 Under Voltage Lock Out (UVLO)
●Key Specifications
 Input voltage range........................................16~39V
 Regulated supply voltage.................................11.5V
 Fixed DC/DC operating frequency.........40~400kHz
 Detectable phase-cut range........................45°~135°
 Typical current consumption.............................1mA
 Under Voltage Lock Out detection.....................9.0V
 Operating temperature range.................-40~+110°C
●Package
SSOP-B14
W(Typ.) x D(Typ.) x H(Max.)
5.00mm x 6.40mm x 1.15mm
●Applications
 Retro-fit dimmable LED lighting (E27, E14, GU10, T8
etc.). Wide range of TRIAC and transistor dimmers
supported by DLCC function.
 Custom LED lighting with PWM or voltage controlled
dimming.
●Typical Application Circuits
Figure 1. Typical application circuit for non-isolated dimmable buck topology
○Product structure：Silicon monolithic integrated circuit
.www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
○This product is not designed protection against radioactive rays
1/12
TSZ02201-0W1W0C300010-1-2
30.July.2013 Rev.003