English
Language : 

BD5471MUV_10 Datasheet, PDF (1/22 Pages) Rohm – Analog Input Stereo Class-D Speaker Amplifier
Small-sized Class-D Speaker Amplifiers
Analog Input
Stereo Class-D Speaker Amplifier
BD5471MUV
No.10101EAT03
●Description
BD5471MUV is a low voltage drive class-D stereo speaker amplifier that was developed for note-book PC, cellular phone,
mobile audio products and the others. LC filters of speaker outputs are unnecessary, and only 7 external components are
needed for speaker system. Also, 3.3V regulator in BD5471MUV can use power supply for audio-codec. BD5471MUV, that
is high-efficiency, low consumption, is suitable for application by using battery. Shutdown current is 0µA typically. Also,
start-up time is fast from shutdown to active mode. BD5471MUV can use for some applications that change mode between
“shutdown state” and “active state”.
●Features
1) High power 2.3W typ. (VDD=5V, RL=4Ω, THD+N=10%, stereo input)
High power 1.5W typ. (VDD=5V, RL=8Ω, THD+N=10%, stereo input)
2) Gain selectable by the external control (6, 12, 18, 24dB)
3) Pop noise suppression circuitry
4) Standby function (Mute function) [ISD=0uA]
5) Protection circuitry (Short protection [Audio, REG], Thermal shutdown, Under voltage lockout)
6) Built-in 3.3V regulator
7) Built-in BEEP detect circuitry
8) Very small package VQFN024V4040
●Applications
Notebook computers,Mobile electronic applications,Mobile phones,PDA etc.
●Absolute Maximum Ratings(Ta=+25℃)
Parameter
Symbol
Power Supply Voltage
VDD
Ratings
Unit
7.0
V
Power Dissipation
0.7 *1
W
Pd
2.2 *2
W
Storage Temperature Range
Tstg
-55 ~ +150
℃
Input Voltage Range *3
Vin
-0.3 ~ VDD+0.3
Control Terminal
Input Voltage Range *4
Vctl
-0.3 ~ VDD+0.3
*1 74.2mm×74.2mm×1.6mm, FR4 1-layer glass epoxy board(Copper on top layer 0%)
Derating in done at 5.6mW/℃ for operating above Ta=25℃. There are thermal via on the board
*2 4.2mm×74.2mm×1.6mm, FR4 4-layer glass epoxy board (Copper on bottom 2 and 3 layer 100%)
*3 input Terminal (INL+, INL-, INR+, INR-)
*4 Control Terminal (MUTE, G0, G1, EAPD, BEEP, REG_SD)
●Operating Conditions
Parameter
Power Supply Voltage
Symbol
VDD
Ratings
+4.5 ~ +5.5
V
V
Unit
V
Temperature Range
Topr
-40 ~ +85
℃
* These products aren’t designed for protection against radioactive rays.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/21
2010.06 - Rev.A