BD5291G-TL Datasheet, PDF (1/29 Pages) Rohm – Input/Output Full Swing Low Input Offset Voltage Operational Amplifier

Datasheet
Operational Amplifiers
Input/Output Full Swing
Low Input Offset Voltage
Operational Amplifier
BD5291xxx
General Description
The BD5291xxx is ideally suited for sensor signal
conditioning. This features input/output full-swing
operation with a supply voltage as low as 1.7V. In
addition, high common-mode rejection ratio, ultra low
input bias current (1pA typical) and low input offset
voltage increase the precision that can be achieved
using these operational amplifiers.
Key Specifications
 Operating Supply Voltage (Single Supply):
+1.7V to +5.5V
 Slew Rate:
2.5V/µs(Typ.)
 Operating Temperature Range: -40°C to +85°C
 Input Voltage Range:
VSS to VDD
 Input Offset Voltage:
±2.5mV (Max)
 Common Mode Rejection Ratio:
70dB (Min)
Features
 Low Operating Supply Voltage
 Input Output Full Swing
 Low Input Offset Voltage
 High Common Mode Rejection Ratio
 High Slew Rate
Applications
 Buffer
 Active Filter
 Sensor Amplifier
 Mobile Equipment
Package
SSOP5
VSOF5
W(Typ) x D(Typ) x H(Max)
2.90mm x 2.80mm x 1.25mm
1.60mm x 1.60mm x 0.60mm
Pin Configuration
OUT 1
VSS 2
+IN 3
+-
5 ^VDD
4 -IN
BD5291FVE : VSOF5
+IN 1
+
VSS 2
-
-IN 3
5 VDD
4 OUT
Figure 1. Pin Configuration
SSOP5
BD5291G
Package
VSOF5
BD5291FVE
Pin No.
1
2
3
4
5
Pin No.
1
2
3
4
5
Pin Name
OUT
VSS
+IN
-IN
VDD
Pin Name
+IN
VSS
-IN
OUT
VDD
○Product structure：Silicon monolithic integrated circuit
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product is not designed protection against radioactive rays.
TSZ02201-0RAR0G200660-1-2
1/25
06.Jun.2016 Rev.005