BD50FA1MG-M Datasheet, PDF (1/23 Pages) Rohm – LDO Regulator

100mA Fixed Output for Automotive
LDO Regulator
BDxxFA1MG-M
● General Description
BDxxFA1MG-M is an LDO regulator with output current capability of 0.1A and output voltage of 5.0V. The SSOP5 package
can contribute to the downsizing of the set. As protective function to prevent IC from destruction, this chip has built-in over
current protection circuit to protect the device when output is shorted and built-in thermal shutdown circuit to protect the IC
during thermal over load conditions. This regulator can use ceramic capacitor, which have smaller size and longer life than
other capacitors.
● Features
 AEC-Q100 Qualified ^(Note1)
 Built-in high accuracy reference voltage circuit
 Built-in Over current protection circuit (OCP)
 Built-in Temperature protection circuit (TSD)
 Zero µA shutdown mode
 Soft start function
(Note1 Grade2)
● Key Features
 Input power supply voltage range:
 Output voltage:
 Output current:
 Shutdown current:
 Operating temperature range:
Vo+3.0V to 25.0V
5.0V
0.1A (Max)
0μA (Typ)
-40°C to +105°C
●Package
SSOP5
W(Typ.) D(Typ.) H(Max.)
2.90mm x2.80mm x 1.25mm
●Typical Application Circuit
VCC
VO
CIN
EN
GND
COUT
C_IN, C_OUT : Ceramic Capacitor
●Ordering Information
B D x x F A 1 MG -
MTR
Part
Output
Number voltage
50:5.0V
Input
Voltage
F:30V
Output Current “M”
A1:0.1A
Series
Package
G:SSOP5
Product Rank
M:for Automotive
Packaging Specification
TR: Embossed tape and reel
○ Product structure : Silicon monolithic integrated circuit
www.rohm.com
© 2016 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product is not designed to have protection against radioactive rays.
1/19
TSZ02201-0GEG0A600050-1-2
3.Feb.2016 Rev.002