BD4216NUV Datasheet, PDF (1/5 Pages) Rohm – Silicon Monolithic Integrated Circuit

1/4
STRUCTURE
Silicon Monolithic Integrated Circuit
PRODUCT SERIES
Strobe Charge Control IC
TYPE
ＢＤ４２１６ＮＵＶ
Functions
1. Built-in power transistor
2. Adjustable transformer primary-side peak current
3. Standby mode switching with the START pin
4. Includes charge complete signal output (FULL) pin.
Includes charge voltage detection (VC) pin (can be set externally).
5. Built-in thermal shutdown circuit (TSD)
6. Built-in IGBT driver
7. Thermally enhanced VSON010V3030 package. (3.0mm x 3.0mm, 1.0mm pitch)
○Absolute maximum ratings(Ta=25℃)
Parameter
Symbol
Limit
Unit
VCC pin
VCC
-0.3 to 7
V
PVC pin
PVC
50
V
VC pin
VC
-10 to 36
V
START pin
START
-0.3 to 7
V
ADJ pin
ADJ
-0.3 to 7
V
FULL pin
FULL
-0.3 to 7
V
IGBT_IN pin
IGBT_IN
-0.3 to 7
V
Operating temperature
Topr
−35 to 85
°C
Storage temperature range
Tstg
−55 to 150
°C
Junction temperature
Tjmax
150
°C
Power dissipation
Pd
1270*1
mW
*1: Reduced by 10.16 mW/°C over Ta = 25°C. (When mounted on 74.2 mm  74.2 mm  1.6 mm, glass epoxy)
○Recommended operating ranges
Parameter
Symbol
Limit
Unit
VCC power supply input voltage range
VCC
2.5 to 5.5
V
START pin input voltage range
VSTART
0 to VCC
V
ADJ pin input voltage range
VADJ
0 to VCC
V
IGBT_IN pin input voltage range
VIGBT_IN
0 to VCC
V
FULL pin input voltage range
VFULL
0 to 5.5
V
◎This product is not designed for normal operation within a radioactive environment.
Status of this document
The Japanese version of this document is the official specification. Please use the translation version of this document as a reference to expedite
understanding of the official version.
If these are any uncertainty in translation version of this document, official version takes priority.
REV. A