|
BD4155FV_10 Datasheet, PDF (1/17 Pages) Rohm – Power Switch IC for ExpressCard | |||
|
Power Management Switch ICs for PCs and Digital Consumer Products
Power Switch IC
for ExpressCardTM
BD4155FV
No.10029EBT10
âDescription
BD4155FV is a power management switch IC for the next generation PC card (ExpressCardTM) developed by the PCMCIA.
It conforms to the PCMCIA ExpressCardTM Standard, ExpressCardTM Compliance Checklist, and ExpressCardTM
Implementation Guideline. , and obtains the Compliance ID âEC100052â from PCMCIA. The power switch offers a number of
functions - card detector, and system status detector - which are ideally suited for laptop and desktop computers.
âFeatures
1) Incorporates three low on-resistance FETs for ExpressCardTM.
2) Incorporates an FET for output discharge.
3) Incorporates under voltage lockout (UVLO) protection.
4) Employs an SSOP-B20 package.
5) Built-in thermal shutdown protector (TSD).
6) Built-in soft start function.
7) Incorporates an overcurrent protection (OCP).
8) Built-in enable signal for PLL
9) Built-in Pull up resistance for detecting ExpressCardTM
10) Conforms to the ExpressCardTM Standard.
11) Conforms to the ExpressCardTM Compliance Checklist.
12) Conforms to the ExpressCardTM Implementation Guideline.
âApplications
Laptop and desktop computers, and other ExpressCard TM equipped digital devices.
âProduct Lineup
Parameter
Package
BD4155FV
SSOP-B20
âExpressCardTMâ is a registered trademark registered of the PCMCIA (Personal Computer Memory Card International Association).
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/16
2010.04 - Rev.B
|
▷ |