|
BD3812F Datasheet, PDF (1/3 Pages) Rohm – 2 channel Volume IC | |||
|
Audio ICs
2 channel Volume IC
BD3812F
BD3812F
BD3812F is a sound processor IC that has features of volume, and gain amplifier required for AV receiver and
mini-component stereo. Up to 4 chips can be used with common bus line by chip select pin.
zApplications
AV receiver and mini stereo set.
zFeatures
1) Volume residual noise : 1.2µ Vrms {Dynamic range : 131dB (IHF-A)}
2) Volume is 2ch-independence. (0 to -103dB, MUTE 1dB / step)
3) BUS is common and be possible to maximum 8channnel-ization of
6ch-Volume IC.
4) It can be controlled until 4 chips with common bus line at the same time.
5) Maximum output voltage : 4.2Vrms (Vcc=7V, VEE=â7V, RL=10kâ¦)
6) The serial data control of 2-wire type. (correspond to 3.3V and 5V)
7) Built-in the convenient output gain amp.(0, 6 to 18dB, 2dB / step) for the
adjustment of the output signal.
8) Output mute be able to serial data and external mute terminal both.
zExternal dimensions (Unit : mm)
8.7±0.2
14
8
1
7
1.27
0.4±0.1
0.15±0.1
0.1
SOP14
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
Impressed voltage
VCCâVEE
Input voltage
VIN
Power dissipation
Pd
Operating temperature
Topr
Storage temperature
Tastg
â This value decreases 4.5mW/ ËC for Ta=25ËC or more.
A standard board,70+ 70+ 1.6mm, shall be mounted.
Limits
15
VCC+0.3 to VEEâ0.3
450 â
â20 to +75
â55 to +125
Unit
V
V
mW
ËC
ËC
zOperating voltage range (Ta=25°C)
Parameter
Symbol Min. Typ. Max. Unit
Power supply (Positive)
VCCâGND
5
â
7.3
V
Power supply (Negative) VEEâGND â5
â
â7.3
V
Rev.A
1/2
|
▷ |