|
BD37503FV Datasheet, PDF (1/32 Pages) Rohm – Sound processor with Built-in 2-band Equalizer | |||
|
Datasheet
Sound Processor Series for Car Audio
Sound processor with Built-in
2-band Equalizer
BD37503FV
âGeneral Description
Sound processor which has built-in 4input selector and
2-band equalizer filter. And, loudness filter and 2nd-order
anti-aliasing filter which attenuate noise occurs at output
of DAC are available, either one by switching.
âFeatures
ï® Built-in differential input selector that can make
various combination of single-ended / differential
input.
ï® Reduce switching noise by using advanced switch
circuit
ï® Built-in ground isolation amplifier inputs, ideal for
external stereo input.
ï® Decrease the number of external components by
built-in 2nd-order anti-aliasing filter
ï® Decrease the number of external components by
built-in 2-band equalizer filter and loudness filter.
ï® A PCB area can be reduced and PCB layouts become
easy thanks to that signal flow is gathered to one
direction by arrangement of input and output left side
and right side separately.
ï® It is possible to control by 3.3V / 5V for I2C BUS serial
controller.
âKey Specifications
ï® Total harmonic distortionï¼
ï® Maximum input voltageï¼
ï® Common mode rejection ratioï¼
ï® Maximum output voltageï¼
ï® Output noise voltageï¼
ï® Residual output noise voltageï¼
ï® Ripple rejection:
ï® Operating temperature range
0.001%(Typ.)
2.2Vrms(Typ.)
50dB(Min.)
2.1Vrms(Typ.)
5.8μVrms(Typ.)
2.8μVrms (Typ.)
-70dB (Typ.)
-40â to +85â
âPackage
SSOP-B20
W(Typ.) x D(Typ.) x H(Max.)
6.50mm x 6.40mm x 1.45mm
âApplications
ï® It is the optimal for the car audio. Besides, it is
possible to use for the audio equipment of mini
Compo, micro Compo, TV etc with all kinds.
SSOP-B20
âTypical Application Circuit
Figure 1. Application Circuit Diagram
âProduct structureï¼Silicon monolithic integrated circuit âThis product is not designed protection against radioactive rays
www.rohm.co.jp
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ã»14ã»001
1/28
TSZ02201-0V2V0E100000-1-2
2013.07.12 Rev.002
|
▷ |