BD3650FP-M Datasheet, PDF (1/11 Pages) Rohm – LDO Regulator

Power Management ICs for Automotive Body Control
LDO
Regulator
BD3650FP-M
No.10039EAT08
●Description
The BD3650FP-M is low-saturation regulator.
This IC has a built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits and a
thermal shutdown circuit that protects the IC from thermal damage due to overloading.
●Features
1) Output Current: 0.3A
2) High Output Voltage Precision : ±2%
3) Low saturation with PDMOS output
4) Built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits
5) Built-in thermal shutdown circuit for protecting the IC from thermal damage due to overloading
6) Low ESR Capacitor
7) TO252-3 packaging
●Applications
Onboard devices (vehicle equipment, car stereos, satellite navigation systems, etc.)
●Absolute maximum ratings(Ta=25℃)
Parameter
Symbol
Ratings
Unit
Supply voltage
Power dissipation
*1
Vcc
-0.3～+36.0
V
*2
Pd
1.2
W
Operating temperature range
Topr
-40～+125
℃
Storage temperature range
Tstg
-55～+150
℃
Maximum Junction Temperature
Tjmax
150
℃
*1 Not to exceed Pd.
*2 TO252-3:Reduced by 9.6mW /℃ over Ta = 25℃, when mounted on glass epoxy board: 70mm×70mm×1.6mm.
●Operating conditions(Ta=-40～+125℃)
Parameter
Symbol
Min.
Supply Voltage
*3
Vcc
5.6
Output current
Io
0
*3 Consider the voltage drop (dropout voltage) due to the output current.
NOTE: This product is not designed for protection against radioactive rays.
Max.
Unit
30.0
V
0.3
A
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/10
2010.11 - Rev.A