|
BD2204GUL Datasheet, PDF (1/24 Pages) Rohm – Power Supply Selector Switch IC for SD Cards | |||
|
BD2204GUL
Datasheet
Power Supply Selector Switch IC
for SD Cards
BD2204GUL
âDescription
BD2204GUL is high side switch IC that has built-in 2
circuits of MOSFET. Switch has achieved 120m Ω
(Typ.) on-resistance. 3.3V power supply and 1.8V
power supply for memory card can be selected by SEL
terminal. Moreover, it has built-in simultaneous-on
prevention function at power switching, reverse-current
protection function to prevent reverse-current from
output terminal to input terminal at power-off, and
discharge circuit to discharge electricity in output
terminal.
âFeatures
 Dual channel of low on resistance (Typ. = 120mâ¦)
N-channel MOSFET built in
 3.3V and 1.8V are chosen and an output is
possible.
 0.5A Continuous Current load
 Reverse-current protection when power switch off
 Prevent VIN1 and VIN2 from simultaneous-on.
 Output Discharge Circuit
 Thermal Shutdown
 Active-High Control Logic
 VCSP50L1 package
âApplications
Digital cameras
Digital video camera
SD cards slot
âKey Specifications
ÂInput voltage range:
ÂON resistance:
ÂOperating current:
ÂStandby current:
ÂOperating temperature range:
VIN1=2.7 to 4.5V
VIN2=1.2 to 2.4V
120mâ¦(Typ.)
25μA(Typ.)
0.01μA(Typ.)
-40 to +85â
âPackage
VCSP50L1
W(Typ.) D(Typ.) H (Max.)
1.50mm x 1.00mm x 0.55mm
VCSP50L1
âTypical Application Circuit
3.3V(Typ.)
1.8V(Typ.)
C IN
VIN1 VOUT
VIN2 GND
EN
SEL
LOAD
CL
Figure 1. Typical application circuit
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
© ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product is not designed protection against radioactive rays
1/21
TSZ02201-0E3E0H300030-1-2
07.Aug.2012 Rev.001
|
▷ |