BD16936EFV-M Datasheet, PDF (1/23 Pages) Rohm – AEC-Q100 Qualified

Datasheet
Motor / Actuator / Drivers for DC Brush Motor Series
Automotive 6ch Half Bridge Driver
with SPI Control
BD16936EFV-M
General Description
The BD16936EFV-M is 6ch Half Bridge Driver for
automotive applications. It can drive compact DC brush
motors directly and each output can be controlled in
three modes (High, Low and High Impedance). MCU
can control the driver via 16bit Serial Interface (SPI). The
part is 60V rated with Low ON Resistance packaged in
compact HTSSOP-28 package, which contributes to
realize high reliability, low energy consumption and low
cost.
Features
■ AEC-Q100 Qualified(Note 1 )
■ 1.0A DMOS half Bridge 6 circuits
■ Three modes Control (High Output, Low Output,
Hi-Z)
■ Low standby current
■ Built-in Protection diode against output reverse
voltage
■ Over Current Detection(OCD)
■ Over Voltage Protection
at output power supply stage(OVP)
■ Under Voltage Lock Out
at output power supply stage(UVLO)
■ Thermal Shut Down(TSD)
(Note 1: Grade 2)
Key Specifications
■ Supply Voltage
8V to 36V
■ Operating Temperature Range -40°C to +110°C
■ Output Current
1.0A
■ Output ON Resistance (High Side) 2.00Ω(Typ)
■ Output ON Resistance (Low Side) 1.30Ω(Typ)
Package
HTSSOP-B28
W(Typ) x D(Typ) x H(Max)
9.70mm x 6.40mm x 1.00mm
HTSSOP-B28
Applications(Note 2 )
Automotive Body Electronics, HVAC, Door Mirrors, etc.
Typical Application Circuit
Voltage
Regulator
Micro
controller
VS1
VS2
VS3
VCC
OUT1
OUT2
OUT3
BD16936EFV
EN
OUT4
CSB
SDI
OUT5
SCK
SDO
OUT6
Figure 1. Typical Application Circuit
(Note 2) Please make sure you consult our company sales representative before mass production of this IC,
if used other than Door Mirror and HVAC.
〇Product structure : Silicon monolithic integrated circuit
.www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
〇This product has no designed protection against radioactive rays
1/20
TSZ02201-0G1G0B300360-1-2
19.Jun.2015 Rev.002