|
BD1606MVV_11 Datasheet, PDF (1/12 Pages) Rohm – Backlight LED Driver for Small LCD Panels (Charge Pump Type) | |||
|
LED Drivers for LED Backlights
Backlight LED Driver
for Small LCD Panels (Charge Pump Type)
BD1606MVV
No.11040EAT24
âDescription
The multi-level brightness control white LED driver not only ensures efficient boost by automatically changing the boost rate
but also works as a constant current driver in 64 steps, so that the driving current can be adjusted finely. This IC is best
suited to turn on white LEDs that require high-accuracy LED brightness control.
âFeatures
1) A 6 parallel LED driver is mounted
2) 64-step LED current adjust function
3) Inter-LED relative current accuracy: 3% or less
4) LED individual lighting/dimming control via a I2C BUS interface
5) Automatic transition charge pump type DC/DC converter (Ã1,Ã1.5 and Ã2)
6) High efficiency achieved (90% or more at maximum)
7) Various protection functions such as output voltage protection, overcurrent limiter and thermal shutdown circuit are mounted.
8) Small QFN package
âApplications
This driver is applicable for various fields such as mobile phones, portable game machines and white goods.
âAbsolute Maximum Rating (Ta=25â)
Parameter
Symbol
Limits
Unit
Power supply voltage
VMAX
7
V
Operating temperature range
Topr
-30 ~ +85
â
Storage temperature range
Tstg
-55 ~ +150
â
Power dissipation
Pd
780 (*1)
(*1) When a glass epoxy substrate (70mm à 70mm à 1.6mm) has been mounted,
this loss will decrease 6.2mW/â if Ta is higher than or equal to 25â.
mW
âRecommended Operation Range (Ta=-30â to +85â)
Parameter
Symbol
Limits
Unit
Operating power supply voltage
VCC
2.7~5.5
V
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/11
2011.04 - Rev.A
|
▷ |