|
BD1604MUV_11 Datasheet, PDF (1/11 Pages) Rohm – Backlight LED Drivers for Small LCD Panels (Charge Pump Type) | |||
|
LED Drivers for LCD Backlights
Backlight LED Drivers
for Small LCD Panels (Charge Pump Type)
BD1604MUV, BD1604MVV
No.11040EBT23
âDescription
This LSI is a 4 white LED driver for small LCD backlight. At the charge pump type, the number of external devices is
minimized.
âFeatures
1) 4 parallel LED driver is mounted.
2) The LED current can be controlled via an external resistance.
3) Maximum current is 120mA (30mA Ã 4).
4) LED1 to LED4 can be turned on or off via an external control pin.
5) The relative current accuracy among LEDs (LED1 to LED4) is 3%.
6) Automatically transition to each mode (Ã1.0, Ã1.5, Ã2.0).
7) High efficiency (90% or more at maximum) is achieved.
8) Various protection functions such as output voltage protection function, current overload limiter and thermal shutdown
circuit are mounted.
âApplications
This driver provides for:
- Backlight using white LED
- Auxiliary lights for mobile phone cameras and simplified flash
âLineup
Parameter
BD1604MUV
BD1604MVV
Number of LED channels
4ch
4ch
Maximum current
Package
120mA
VQFN016V3030
3.00mmÃ3.00mm
120mA
SQFN016V4040
4.00mmÃ4.00mm
âAbsolute Maximum Rating (Ta=25â)
Parameter
Symbol
Ratings
Unit
Power supply voltage
Vmax
7
V
BD1604MUV
Allowable loss
Pd
BD1604MVV
700 *1
mW
780 *2
Operating temperature range
Topr
ï¼30~85
â
Storage temperature range
Tstr
ï¼55~150
â
*1 When a glass epoxy substrate (70mmÃ70mmÃ1.6mm) has been mounted, this loss will decrease 5.6mW/â if Ta is higher than or equal to 25â.
*2 When a glass epoxy substrate (70mmÃ70mmÃ1.6mm) has been mounted, this loss will decrease 6.24mW/â if Ta is higher than or equal to 25â.
âRecommended Operation Range
Parameter
Symbol
Limits
Unit
Condition
Operating supply voltage
VBAT
2.7ï½5.5
V VBAT voltage
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/10
2011.06 - Rev.B
|
▷ |