|
BD1601MUV_11 Datasheet, PDF (1/13 Pages) Rohm – Backlight LED Driver for Small LCD Panels (Charge Pump Type) | |||
|
LED Drivers for LCD Backlights
Backlight LED Driver
for Small LCD Panels (Charge Pump Type)
BD1601MUV
No.11040EBT22
âDescription
The multi-level brightness control white LED driver not only ensures efficient boost by automatically changing the boost rate
but also works as a constant current driver in 64 steps, so that the driving current can be adjusted finely. This IC is best
suited to turn on white LEDs that require high-accuracy LED brightness control.
âFeatures
1) Built-in parallel LED driver for 4 to 6 lamps.
2) 64-step LED current adjust function.
3) Inter-LED relative current accuracy: 3% or less
4) Lighting/dimming control via a single-line digital control interface.
5) Automatic transition charge pump type DC/DC converter (Ã1,Ã1.5 and Ã2).
6) High efficiency achieved (90% or more at maximum).
7) Various protection functions such as output voltage protection, over current limiter and thermal shutdown circuit are mounted.
8) Small QFN package.
âApplications
This driver is applicable for various fields such as mobile phones, portable game machines and white goods.
âAbsolute Maximum Ratings
(Ta=25â)
Parameter
Symbol
Ratings
Unit
Power supply voltage
VMAX
7
V
Operating temperature range
Topr
-30 ~ +85
â
Storage temperature range
Tstg
-55 ~ +150
Power dissipation
Pd
700 (*1)
(*1) When a glass epoxy substrate (70mm à 70mm à 1.6mm) has been mounted,
this loss will decrease 5.6mW/â if Ta is higher than or equal to 25â.
âOperating Conditions
(Ta = -30 ~ 85â)
Parameter
Symbol
Ratings
â
mW
Unit
Operating power supply voltage
VCC
2.7~5.5
V
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/12
2011.06 - Rev.B
|
▷ |