|
BD1482EFJ Datasheet, PDF (1/20 Pages) Rohm – Low Standby Current during Shutdown Mode | |||
|
Datasheet
4.2V to 18V, 2A 1ch
Synchronous Buck Converter integrated FET
BD1482EFJ
âGeneral Description
The BD1482EFJ is a synchronous step-down
switching regulator that integrates 2 low ON-resistance
N-channel MOSFETs. It achieves 2A continuous
output current over a wide input supply range. Current
mode operation provides fast transient response and
easy phase compensation.
âFeatures
ï® Low ESR Output Ceramic Capacitors are
Available
ï® Low Standby Current during Shutdown Mode
ï® 380 kHz Fixed Operating Frequency
ï® Feedback voltage
ï 0.923V ± 1.5%(Ta=25â),
ï 0.923V ± 2.0%(Ta=-25â to 85â)
ï® Protection Circuits
ï Under Voltage Lockout Protection
ï Thermal Shutdown
ï Over Current Protection
âKey Specifications
ï® Input voltage range:
4.2V to 18V
ï® Output voltage range:
0.923V to (VinÃ0.7)V
ï® Output current:
2.0A (Max.)
ï® Switching Frequency
380kHz(Typ.)
ï® Hi-side FET On-resistance:
0.15Ω(Typ.)
ï® Lo-side FET On-resistance:
0.13Ω(Typ.)
ï® Standby current:
15μA (Typ.)
ï® Operating temperature range:
-40â to +85â
âPackage
HTSOP-J8
(Typ.) (Typ.) (Max.)
4.90mm x 6.00mm x 1.00mm
âApplications
Distributed Power System
Pre-Regulator for Linear Regulator
âTypical Application Circuit
C_SS
0.1μF
HTSOP-J8
C_PC
3300pF
R_PC
7.5kΩ
R_DW
15kΩ
R_UP
39kΩ
Thermal Pad
(to be shorted to GND)
VIN 12V
C_VC1
10μF
L
10µH
VOUT 3.3V
C_CO1
20μF
â»R_BS protect from VIN-BST short destruction.
Fig.1 Typical Application Circuit
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
©2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product is not designed protection against radioactive rays.
TSZ02201-0333AD100130-1-2
1/17
06.Aug.2012 Rev.001
|
▷ |